Requested by a few members so I'm posting it here for those that wanted IT...
Go Here if you want/need the battery!!!
Tools needed are some painters tape, Heavy duty scissors, 22awg wire or smaller, or Solder wick.
Soldering Iron also but not required![What I used]
Using the small wire you just have to line up the wire with the terminals, as shown in the pics
For Advance users Soldering Iron required. Don't get burned working with these small wires
I used my soldering iron to solder the back side of the connections I made using the solder wick. So they would stay in place because of the wick being very soft...
INSTRUCTIONS PICS BELOW
The rest of the pics with instructions will be added soon...
Redid the Nfc battery hack with Pics below.
Below pics were after above steps were done. I just reversed the NFC chip on the battery!!!
YOU MUST REVERSE THE NFC OR IT WILL NOT WORK!!!!!!!!
Above images was after I realize that the chip was put on wrong. Didn't actually think is was really necessary to be set one WAY!!
Well after about if 30 minutes of testing and it wasn't WORKING!!!
Panic a lil bit... Was saying to myself why did you change it, cause now you done broke it.
Then I said to my self hey it don't look like the same thing I had set up b4. Being the T-Mobile symbol was facing out. So I pulled everything apart. Well only took off the NFC chip. Good thing I put that painters tape on the battery first. So the chip had something to stick to. But in the end became the back of the chip. Now you just to add some tape to secure the sides of the chip after reversing it.