Post Reply

[Q] Samsung Focus doesn't boot

OP jmweb

2nd March 2012, 06:59 PM   |  #1  
jmweb's Avatar
OP Junior Member
Thanks Meter: 0
 
11 posts
Join Date:Joined: Feb 2009
More
Hi, please help me. My Samsung Focus 1.3 doesn't boot, only starts and gets stuck on samsung blinking screen. I've tryed to make hard reset, but keys don't work. It only accept download mode. What can I do?
2nd March 2012, 11:38 PM   |  #2  
Recognized Developer
Flag Seattle
Thanks Meter: 2,708
 
5,730 posts
Join Date:Joined: Jan 2011
More
Try either restoring a Zune update, or re-flashing the stock ROM. There should be downloads and instructions for the latter in the device-specific part of the forum.
2nd March 2012, 11:38 PM   |  #3  
Recognized Developer
Flag Seattle
Thanks Meter: 2,708
 
5,730 posts
Join Date:Joined: Jan 2011
More
Alternatively, make sure the SD card (if you use one) is seated correctly. However, I think the most likely problem is just hardware failure, in which case you probably need to get the phone replaced (I assume it's under warranty).
3rd March 2012, 09:32 PM   |  #4  
jmweb's Avatar
OP Junior Member
Thanks Meter: 0
 
11 posts
Join Date:Joined: Feb 2009
More
Hi, it's impossible to start on MAGLDGR mode. This phone only accept Download mode, the yellow triangle. There is another way to re-flash from download mode?

After flashing with Focus 1.3 i917 AT&T USA and i917R ROGERS CANADA RETAIL ROMs, using WP7 downloader v. 7.21, it's stucked and just displays SAMSUNG.

Sorry, almost forget, Zune doesn't recognize my device.
Last edited by jmweb; 3rd March 2012 at 11:27 PM.
3rd March 2012, 11:30 PM   |  #5  
jmweb's Avatar
OP Junior Member
Thanks Meter: 0
 
11 posts
Join Date:Joined: Feb 2009
More
I re-flash using I917UCK3 with similar results. This are the processes on WP7:

Open Phone image at : c:\users\nsc3\documents\jm\wp7\samsung-i917-focus-firmware-ucjk2-att-usa\signed_phone_cetus_att.bin
Open Eboot image at : c:\users\nsc3\documents\jm\wp7\samsung-i917-focus-firmware-ucjk2-att-usa\signed_eboot_cetus_att.eb0
Open PDA image at : c:\users\nsc3\documents\jm\wp7\samsung-i917-focus-firmware-ucjk2-att-usa\signed_pda_cetus_att.nb0
Open CSC image at : c:\users\nsc3\documents\jm\wp7\samsung-i917-focus-firmware-ucjk2-att-usa\signed_csc_cetus_att_i917attjk2.csc
Detect COM17 Port
[Channel 0] Confirm Model Name
[Channel 0] FLASH UNLOCK
[Channel 0] FLASH UNLOCK Success!!!
[Channel 0] Send Partition Table
[Channel 0] Partition Table is correct
[Channel 0] Erase MIBIB Region
[Channel 0] Write MIBIB Data
[Channel 0] MIBIB Download Success!!
[Channel 0] Erase FSBL Region
[Channel 0] Write FSBL Data
[Channel 0] FSBL Download Success!!
[Channel 0] Erase OSBL Region
[Channel 0] Write OSBL Data
[Channel 0] OSBL Download Success!!
[Channel 0] Erase AMSS Region
[Channel 0] Write AMSS Data
[Channel 0] AMSS Download Success!!
[Channel 0] Erase DSP1 Region
[Channel 0] Write DSP1 Data
[Channel 0] DSP1 Download Success!!
[Channel 0] Erase APPSBL Region
[Channel 0] Write APPSBL Data
[Channel 0] APPSBL Download Success!!
[Channel 0] Erase CSC Region
[Channel 0] Write CSC Data
[Channel 0] CSC Download Success!!
[Channel 0] Erase PDA Region
[Channel 0] Write PDA Data
[Channel 0] PDA Download Success!!
[Channel 0] FLASH LOCK
Detect COM17 Port
17th February 2014, 07:44 PM   |  #6  
Junior Member
Flag Niamey
Thanks Meter: 0
 
2 posts
Join Date:Joined: Jan 2014
More
Unhappy Samsung Focus doesn't boot
Quote:
Originally Posted by jmweb

I re-flash using I917UCK3 with similar results. This are the processes on WP7:

Open Phone image at : c:\users\nsc3\documents\jm\wp7\samsung-i917-focus-firmware-ucjk2-att-usa\signed_phone_cetus_att.bin
Open Eboot image at : c:\users\nsc3\documents\jm\wp7\samsung-i917-focus-firmware-ucjk2-att-usa\signed_eboot_cetus_att.eb0
Open PDA image at : c:\users\nsc3\documents\jm\wp7\samsung-i917-focus-firmware-ucjk2-att-usa\signed_pda_cetus_att.nb0
Open CSC image at : c:\users\nsc3\documents\jm\wp7\samsung-i917-focus-firmware-ucjk2-att-usa\signed_csc_cetus_att_i917attjk2.csc
Detect COM17 Port
[Channel 0] Confirm Model Name
[Channel 0] FLASH UNLOCK
[Channel 0] FLASH UNLOCK Success!!!
[Channel 0] Send Partition Table
[Channel 0] Partition Table is correct
[Channel 0] Erase MIBIB Region
[Channel 0] Write MIBIB Data
[Channel 0] MIBIB Download Success!!
[Channel 0] Erase FSBL Region
[Channel 0] Write FSBL Data
[Channel 0] FSBL Download Success!!
[Channel 0] Erase OSBL Region
[Channel 0] Write OSBL Data
[Channel 0] OSBL Download Success!!
[Channel 0] Erase AMSS Region
[Channel 0] Write AMSS Data
[Channel 0] AMSS Download Success!!
[Channel 0] Erase DSP1 Region
[Channel 0] Write DSP1 Data
[Channel 0] DSP1 Download Success!!
[Channel 0] Erase APPSBL Region
[Channel 0] Write APPSBL Data
[Channel 0] APPSBL Download Success!!
[Channel 0] Erase CSC Region
[Channel 0] Write CSC Data
[Channel 0] CSC Download Success!!
[Channel 0] Erase PDA Region
[Channel 0] Write PDA Data
[Channel 0] PDA Download Success!!
[Channel 0] FLASH LOCK
Detect COM17 Port


Hello, i have got the same probleme, please how did you resolve the problème ?
Post Reply Subscribe to Thread

Tags
boot, focus, problem, samsung
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes