Hi Guys! I will show you in this thread how to flash the CM10.1.3 on galaxy ace plus and how to fix the camera!
Disclaimer: By downloading and flashing/installing any of TheWhisp's files on your device, I am not responsible for any damage done to your phone and/or anything else that dissatisfies you. The development process is in an early stage, that means, anything can happen.
First Check That You Have These Things:
All Samsung drivers already installed
GT-S7500 ONLY (NO OTHER VARIANTS!)
All neccessary packages Downloaded
Now you have to flash cwm on your phone,I prefer 188.8.131.52 :
1)Download the cwm package(recovery.tar)
2)Download odin3 and extract
3)Now you have to enable USB Debugging in your phone By going to Settings=>Applications=>Development
4)Now turn off your device and boot into download mode(volume down+home+power) and press volume up to continue
5)In your PC open odin3 and connect your phone to your computer,wait until ID:COM turn yellow in odin3
6)Make Sure that "Auto Reboot" and "F.Reset Time" are checked and "Repartion" is UNCHECKED
7)Press PDA and choose the cwm package (it must be a .tar or .tar.md5 package) and press start
8)Wait 1 min and odin will finish the process,you will see PASS and your phone will Reboot
Full GPU acceleration
RIL (calls/sms/mobile data)
Mounting of internal/external storage
What's not working:
Now flashing the cm10.1.3 rom:
1)Download the cm10.1.3 rom from here http://www.mediafire.com/?cft4ug29b2am587
and gapps from here http://goo.im/gapps/gapps-jb-20130301-signed.zip
2)Copy these packages to the root of your External SD of your phone
3)Turn off your device and boot to recovery mode(volume up+volume down+home+power)
Wipe data/factory reset,wipe cache and wipe davilik cache
4) Now press "install zip from sdcard" than "choose zip from sdcard" and then select the cm10.1.3 package and "Yes"
5)Wait to finish installation and now repeat the same thing but choose the gapps package instead of the cm10.1.3 package
6)When it finish,press "Reboot System Now"
That's it!The cm10.1.3 is now successfully installed and your android version is 4.1.2 !!
NOTE:The first boot will take some time(~5min) so don't panic!!!
If you want to fix the camera just proceed to this thread http://forum.xda-developers.com/show....php?t=2345981
But maybe the camera will work,so check it before doing anything.
thewhisp for Building jellybean rom that was a dream for us
thewhisp for source kernel
So all the credits goes to TheWhisp
JUST I WANT FROM YOU TO HIT THANKS!!