Originally Posted by Cat McGowan
Actually, it is the second and third.
Thanks for that, I didn't see that printed on the back of the charger! My dog did a similar thing last summer, the end completely vanished. Didn't bother getting a new one at the time (about £20) and have just realised that the price has sky rocketed.
I bought a used SGPDS1 cradle on ebay for £20 and intend to modify it to become my new charger
To take it apart, the rear stand slides up fully with a firm push (careful, there are two silver plastic tabs to gently unclick underneath)
There are then 4 screws to undo and a plastic cover comes off the back of the main cradle to expose the wiring loom.
I want to connect a fly lead to the wiring loom and attach my end-less charger to it.
Before I do this, can a kind soul confirm that the outer two contacts are not connected? Inside the cradle, all the wires are connected, and the middle white connection breaks out into two connections
I am guessing the white wires are positive (connection 2 from left) and the black negative.
I have attached a few photos.