FORUMS

S4 i9505 update soft problem

32 posts
Thanks Meter: 4
 
By grofudaniel, Member on 6th March 2014, 09:41 AM
Post Reply Subscribe to Thread Email Thread
Hi, i didn't have enough patience for the BTU 4.4.2 soft and tried to install the NEE version but at the end of the update i got this:
Quote:

<ID:0/005> Added!!<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUFNB9_I9505NEEFNB2_I9505XXUFNB9_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl2.mbn
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005> tz.mbn
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> modem.bin
<ID:0/005> NON-HLOS.bin
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Removed!!

Then i tried to install DBT 4.4.2 and got stuck with this:

Quote:

<ID:0/005> Added!!<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUFNB8_I9505OXAFNB8_I9505XXUFNB8_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> sbl2.mbn
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> __XmitData_Write
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Removed!!

What should i do next except going to service?

THX in advance
 
 
speedwayfan75
6th March 2014, 04:08 PM |#2  
Guest
Thanks Meter: 0
 
More
Quote:
Originally Posted by grofudaniel

Hi, i didn't have enough patience for the BTU 4.4.2 soft and tried to install the NEE version but at the end of the update i got this:


Then i tried to install DBT 4.4.2 and got stuck with this:



What should i do next except going to service?

THX in advance

How did you start your phone in download mode? Via power menu or did you hold volume down and power button?
Very important is:
use only the two button combo.
In Odin untick autoreboot.
Start windows task manager and stop all Kies processes.
Use only the original Samsung USB cable.
If all that not works try another USB port.
And do not remove your phone from PC before Odin says PASS.
When Odin shows pass, remove the phone and hold the power button until it reboots.
6th March 2014, 04:17 PM |#3  
OP Member
Thanks Meter: 4
 
More
I tried different ports with different softs and different data cables but no results.
Instead, i tried install nee from my laptop and it worked from the first time.
So, i supose it's from my pc's drivers.
Last edited by grofudaniel; 6th March 2014 at 04:20 PM.
The Following User Says Thank You to grofudaniel For This Useful Post: [ View ]
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes