Attend XDA's Second Annual Developer Conference, XDA:DevCon 2014!
5,731,698 Members 49,618 Now Online
XDA Developers Android and Mobile Development Forum

S4 i9505 update soft problem

Tip us?
 
grofudaniel
Old
#1  
Junior Member - OP
Thanks Meter 3
Posts: 26
Join Date: Mar 2009
Default S4 i9505 update soft problem

Hi, i didn't have enough patience for the BTU 4.4.2 soft and tried to install the NEE version but at the end of the update i got this:
Quote:
<ID:0/005> Added!!<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUFNB9_I9505NEEFNB2_I9505XXUFNB9_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl2.mbn
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005> tz.mbn
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> modem.bin
<ID:0/005> NON-HLOS.bin
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Removed!!
Then i tried to install DBT 4.4.2 and got stuck with this:

Quote:
<ID:0/005> Added!!<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUFNB8_I9505OXAFNB8_I9505XXUFNB8_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> sbl2.mbn
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> __XmitData_Write
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Removed!!
What should i do next except going to service?

THX in advance
 
speedwayfan75
Old
#2  
speedwayfan75's Avatar
Senior Member
Thanks Meter 1554
Posts: 1,059
Join Date: Feb 2013
Location: Hanau

 
DONATE TO ME
Quote:
Originally Posted by grofudaniel View Post
Hi, i didn't have enough patience for the BTU 4.4.2 soft and tried to install the NEE version but at the end of the update i got this:


Then i tried to install DBT 4.4.2 and got stuck with this:



What should i do next except going to service?

THX in advance
How did you start your phone in download mode? Via power menu or did you hold volume down and power button?
Very important is:
use only the two button combo.
In Odin untick autoreboot.
Start windows task manager and stop all Kies processes.
Use only the original Samsung USB cable.
If all that not works try another USB port.
And do not remove your phone from PC before Odin says PASS.
When Odin shows pass, remove the phone and hold the power button until it reboots.
Samsung Galaxy S4 GT-I9505
EchoeROM V26
TWRP 2.7.1.0

Howto Odin flash modem and bootloader
ECHOEROM? FOLLOW ME
 
grofudaniel
Old
(Last edited by grofudaniel; 6th March 2014 at 04:20 PM.)
#3  
Junior Member - OP
Thanks Meter 3
Posts: 26
Join Date: Mar 2009
I tried different ports with different softs and different data cables but no results.
Instead, i tried install nee from my laptop and it worked from the first time.
So, i supose it's from my pc's drivers.
The Following User Says Thank You to grofudaniel For This Useful Post: [ Click to Expand ]
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes