As we know 4.4 kitkat has been launched. Thanks to galaxyfreak for bringing that update to our device.
Which is CM11 4.4.2.
RC 4 released.
Last build for CM11
Thanks to:
@galaxyfreak for CM11 i.e Kitkat
@akshay4 for OC Kernel
@Buleste for testing script
Before flashing any rom flash : THIS
Mandatory steps to follow to flash CM11 or any rom:
1.Go to recovery.
2.Wipe data/factory reset.
3.Wipe cache partition.
4.Go to advanced
5.Wipe dalvich cache.
6.Go back.
7.Go to mounts and storage
8.Format /boot,/cache,/system,/sd-ext(If you have created any partition)
Dont format or touch anything else
9.Go back.
10. Select Install zip from sd card.
11. Select your rom. After install
12. Reboot system now.
13. Done
Original thread is located here: CM11 aka KITKAT 4.4.2
Direct download for RC4 CM11 RC4 with recovery
Direct download for RC3 CM 11 RC3
Direct Download for RC2 : CM11 RC2
Direct Download RC 1 with changelogs: CM11 RC1
Direct Download Beta 5 with changelogs:CM 11 Beta 5
Direct Download Beta 4 with changelogs:CM11 Beta 4
Direct download for new build with changelogs:New Build (GPS still not working)
Now flash the gapps from here : Gapps for cm11
For RC3 and RC4 you need awesome recovery older version.. Have attached the rcovery check the end of the post..
It is a special modified TWRP Recovery known as aw3som3 recovery.. This recovery increases our system partition.
Many users flash the aw3som3 recovery via app but its not a good process as this recovery changes the partition.
How to flash the aw3som3 recovery.
1. First fash THIS via your present recovery.
2. Now copy the downloaded recovery in a folder where adb and fastboot drivers are installed.
3. Connect your device in fastboot mode.
4. Open command prompt and type
You should freshly install RC1 and New build dont just flash over beta 4 or beta 5
Clean flash RC2
RC1 and New build has enough system memory for the gapps to work..
So no need to delete anything..
Installation instructions for RC2
1. Flash the rom. Remain in recovery.
2. Just after flashing rom flash : This
3. Flash gapps
You wont face any sign in errors..
GPS is not working in RC1.. Some users reported it to be working..
Installation instructions for beta 4 and beta 5 :
There are two methods:
1.Before Install
Open the zip.
Delete following files from rom zip:
term.apk
email.apk
exchange2.apk
browser.apk
cmfilemanger.apk (optional)
Now flash the rom and after first boot of the rom then flash the gapps..
2.After install
1.Open Titanium backup
2.Tap on Backup/restore option (Before uninstall it asks to take backup if you can backup the app then uninstall it)
3.Tap on the apps listed above.
4.Select uninstall
5.Done
If facing sign in error mount your partiton from settings -> extras-> tick on mount /data to /SD ext reboot then manually install Google Play services(Beta 4 and Beta 5 only).
You can find that in gapps zip in system/priv-app named prebuilt GMScore.apk like this..
Make sure your are on latest TWRP or philz or whichever recovery which mounts and supports ext mounting..
Check here for Philz Recovery : Philz Recovery
Check here hor TWRP : TWRP Recovery
Check here for CWM : CWM Recovery
There is no option to enable int2ext in RC2 like previous builds so you need ti flash the script.
If you are a user who doesnt install use or install many apps but want the memory increase:
Just go in settings-> Extras->Tick on /mount /sd ext option->Restart your device.(Not for RC2 as there is no option to enable ext))
If you are using many apps then refer this: (Its int2ext)Script or else you wont be able to download apps from playstore.
The reason for not able to install apps from playstore
The inbuilt script is int2ext+ Which leaves /data to /data (The reason and explanation in detail Check Here)
List of all scripts working check here: Cronmod Scripts
How to copy paste scripts and list of scripts : Check here
If you dont want to do any copy and pasting of scripts just follow this steps:
1. Open the rom zip .. Dont extract
2. Go to system/etc/init.d
3. Now copy the above script in the location given in 2nd step.. It will ask for replace replace it..(Not applicable on RC2)
4. Now flash the rom.
5. Done
You want to oc(Overclocking) refer this: OC kernal for beta 4
OC for beta 5/RC1: OC Kernel for beta 5/RC1 Instagram is not working in this OC Kernel.
OC for RC2 : OC Kernel for RC2
OC for RC4 : OCKernel for RC4
Partition for oc:
SD main-> SD ext (512 mb or more)-> SD cache (65 mb)
All partitions should be primary
SD ext and SD cache partition type should be same.
Ex if SD ext is ext4 then sd cache should also be ext4.
If facing sign in error install play sevices attached below..
Which is CM11 4.4.2.
RC 4 released.
Last build for CM11
Thanks to:
@galaxyfreak for CM11 i.e Kitkat
@akshay4 for OC Kernel
@Buleste for testing script
Before flashing any rom flash : THIS
Mandatory steps to follow to flash CM11 or any rom:
1.Go to recovery.
2.Wipe data/factory reset.
3.Wipe cache partition.
4.Go to advanced
5.Wipe dalvich cache.
6.Go back.
7.Go to mounts and storage
8.Format /boot,/cache,/system,/sd-ext(If you have created any partition)
Dont format or touch anything else
9.Go back.
10. Select Install zip from sd card.
11. Select your rom. After install
12. Reboot system now.
13. Done
Original thread is located here: CM11 aka KITKAT 4.4.2
Direct download for RC4 CM11 RC4 with recovery
Direct download for RC3 CM 11 RC3
Direct Download for RC2 : CM11 RC2
Direct Download RC 1 with changelogs: CM11 RC1
Direct Download Beta 5 with changelogs:CM 11 Beta 5
Direct Download Beta 4 with changelogs:CM11 Beta 4
Direct download for new build with changelogs:New Build (GPS still not working)
Now flash the gapps from here : Gapps for cm11
For RC3 and RC4 you need awesome recovery older version.. Have attached the rcovery check the end of the post..
It is a special modified TWRP Recovery known as aw3som3 recovery.. This recovery increases our system partition.
Many users flash the aw3som3 recovery via app but its not a good process as this recovery changes the partition.
How to flash the aw3som3 recovery.
1. First fash THIS via your present recovery.
2. Now copy the downloaded recovery in a folder where adb and fastboot drivers are installed.
3. Connect your device in fastboot mode.
4. Open command prompt and type
5. After succesful recovery flashing, again flash the attachment on first step then flash the rom.fastboot flash recovery recovery.img(If your recovery is named as recoveryv1 then instead of recovery.img type recoveryv1.img)
You should freshly install RC1 and New build dont just flash over beta 4 or beta 5
Clean flash RC2
RC1 and New build has enough system memory for the gapps to work..
So no need to delete anything..
Installation instructions for RC2
1. Flash the rom. Remain in recovery.
2. Just after flashing rom flash : This
3. Flash gapps
You wont face any sign in errors..
GPS is not working in RC1.. Some users reported it to be working..
Installation instructions for beta 4 and beta 5 :
There are two methods:
1.Before Install
Open the zip.
Delete following files from rom zip:
term.apk
email.apk
exchange2.apk
browser.apk
cmfilemanger.apk (optional)
Now flash the rom and after first boot of the rom then flash the gapps..
2.After install
1.Open Titanium backup
2.Tap on Backup/restore option (Before uninstall it asks to take backup if you can backup the app then uninstall it)
3.Tap on the apps listed above.
4.Select uninstall
5.Done
If facing sign in error mount your partiton from settings -> extras-> tick on mount /data to /SD ext reboot then manually install Google Play services(Beta 4 and Beta 5 only).
You can find that in gapps zip in system/priv-app named prebuilt GMScore.apk like this..
Make sure your are on latest TWRP or philz or whichever recovery which mounts and supports ext mounting..
Check here for Philz Recovery : Philz Recovery
Check here hor TWRP : TWRP Recovery
Check here for CWM : CWM Recovery
There is no option to enable int2ext in RC2 like previous builds so you need ti flash the script.
If you are a user who doesnt install use or install many apps but want the memory increase:
Just go in settings-> Extras->Tick on /mount /sd ext option->Restart your device.(Not for RC2 as there is no option to enable ext))
If you are using many apps then refer this: (Its int2ext)Script or else you wont be able to download apps from playstore.
The reason for not able to install apps from playstore
The inbuilt script is int2ext+ Which leaves /data to /data (The reason and explanation in detail Check Here)
List of all scripts working check here: Cronmod Scripts
How to copy paste scripts and list of scripts : Check here
If you dont want to do any copy and pasting of scripts just follow this steps:
1. Open the rom zip .. Dont extract
2. Go to system/etc/init.d
3. Now copy the above script in the location given in 2nd step.. It will ask for replace replace it..(Not applicable on RC2)
4. Now flash the rom.
5. Done
You want to oc(Overclocking) refer this: OC kernal for beta 4
OC for beta 5/RC1: OC Kernel for beta 5/RC1 Instagram is not working in this OC Kernel.
OC for RC2 : OC Kernel for RC2
OC for RC4 : OCKernel for RC4
Partition for oc:
SD main-> SD ext (512 mb or more)-> SD cache (65 mb)
All partitions should be primary
SD ext and SD cache partition type should be same.
Ex if SD ext is ext4 then sd cache should also be ext4.
Hit Thanks guys
It will encourage me to make more helpful guides
It will encourage me to make more helpful guides
If facing sign in error install play sevices attached below..
Attachments
Last edited: