Post Reply

[Q] system.img.ext4 not found while doing the URDLV method.

OP mathmango

1st January 2014, 03:26 PM   |  #1  
mathmango's Avatar
OP Junior Member
Thanks Meter: 0
 
7 posts
Join Date:Joined: May 2013
More
I got my firmware from sammobile and extracted this

N9005ZHUBMI7_N9005ZZHBMI7_N9005XXUBMI5_HOME.tar.md 5

Using this method:


http://forum.xda-developers.com/show...hubmi7&page=84


Since it was a huge file it took hours for me to download and I got all the other necessary prerequisites ( Sammmobile firmware, URDLV, Cygwin and Odin) and as I opened up cygwin started to do the full method and things go smoothly. then when I execute the URDLV.sh this happens

Code:
 Mode: full
 Filename: N9005ZHUBMI7_N9005ZZHBMI7_N9005XXUBMI5_HOME
 Extension: md5

 Extracting Firmware...
 system.img.ext4 NOT found!
Using the CSC method I get this error

Code:
 Mode: csc
 Filename: N9005ZHUBMI7_N9005ZZHBMI7_N9005XXUBMI5_HOME
 Extension: md5

 Extracting Firmware...
 cache.img.ext4 NOT found!

So, I'm stuck. I don't know what I did wrong.
I checked the MD5 file(opened with winamp) and the files were there
Last edited by mathmango; 1st January 2014 at 04:28 PM. Reason: Additional info and typo correction
13th January 2014, 10:34 AM   |  #2  
Junior Member
Thanks Meter: 0
 
10 posts
Join Date:Joined: Nov 2007
Hi Mathmango, wondering if you managed to figure this out? I'm getting exactly the same error.

Cheers
Anthony

Quote:
Originally Posted by mathmango


I opened up cygwin started to do the full method and things go smoothly. then when I execute the URDLV.sh this happens

Code:
 Mode: full
 Filename: N9005ZHUBMI7_N9005ZZHBMI7_N9005XXUBMI5_HOME
 Extension: md5

 Extracting Firmware...
 system.img.ext4 NOT found!
Using the CSC method I get this error

Code:
 Mode: csc
 Filename: N9005ZHUBMI7_N9005ZZHBMI7_N9005XXUBMI5_HOME
 Extension: md5

 Extracting Firmware...
 cache.img.ext4 NOT found!

So, I'm stuck. I don't know what I did wrong.
I checked the MD5 file(opened with winamp) and the files were there

7th March 2014, 06:20 PM   |  #3  
Junior Member
Flag Bucharest
Thanks Meter: 0
 
2 posts
Join Date:Joined: Nov 2010
More
You have to place the image in the same folder where you have URDLV.sh;

For example C:/Root/Universal-RDLV_v0.5/
Output dir
tools dir
License.txt
N9005XXUENB3_N9005OXXENB1_N9005XXUENB1_HOME.tar
SS_DL.dll
URDLV.sh

this worked for me . First i had the same error but after i copied the firmware in the same director fixed the problem.
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes


Top Threads in Galaxy Note 3 Q&A, Help & Troubleshooting by ThreadRank