FORUMS

[Q] AT&T Galaxy Note 1 SGH-i717 Unbrick Help with Odin

10 posts
Thanks Meter: 4
 
By jeffcarp003, Junior Member on 7th September 2013, 09:17 PM
Post Reply Subscribe to Thread Email Thread
How it started:

A pop message appears asking to format the phone, I accidentally hit okay, after 10 seconds I realized it, I immediately stopped the process by hitting the back button which caused my phone to go blank screen and freeze. so I pressed and hold power button, and the phone shuts off turns back on then it get stuck on the Samsung Logo/screen and won't go through no matter how long I wait.

So with that said I may have corrupted my Operating System so I went online to try to look for solutions to recover my Note.

i have downloaded Odin v1.85 and v3.07
i have downloaded the latest OS Jellybean from samsung:
(KIES_HOME_I717UCMD3_I717ATTMD3_1117019_REV02_user _low_ship.tar.md5)
i have downloaded the latest USB software and currently using the original cable that came in the box.

I open Odin v1.85 on my Windows 7 Ultimate Desktop
i put my phone in Odin download mode (power + volume down)
I pressed volume up
I plugged in my phone to the USB
I clicked start
and then I get stuck

<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I717UCMD3_I717ATTMD3_1117019_REV02_user_ low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> amss.bin
<ID:0/005> NAND Write Start!!

Please see my screenshot as attachment.

Please help!

Thank you!
Attached Thumbnails
Click image for larger version

Name:	pic1.jpg
Views:	356
Size:	45.3 KB
ID:	2242112  
The Following User Says Thank You to jeffcarp003 For This Useful Post: [ View ]
 
 
7th September 2013, 10:31 PM |#3  
OP Junior Member
Thanks Meter: 4
 
More
okay thank you i am reading it now.

i will report back with the outcome.

thanks once again.
The Following User Says Thank You to jeffcarp003 For This Useful Post: [ View ]
7th September 2013, 10:36 PM |#4  
OP Junior Member
Thanks Meter: 4
 
More
okay before i go further if you look at my attachment

first box says "MODEM"

is this normal?

i saw a vid on youtube shows "SYSTEM"
The Following User Says Thank You to jeffcarp003 For This Useful Post: [ View ]
7th September 2013, 11:20 PM |#5  
OP Junior Member
Thanks Meter: 4
 
More
I have read your guide and installed the latest samsung USB driver

I rebooted my computer opened ODIN as admin

followed instructions and i am back to my original post

i think it has something to do with the fact mine shows "MODEM"

this is what i'm talking about.

the difference is on this pic it shows "SYSTEM"

while mine says "MODEM"

does that mean my phone can no longer be recovered?

Am I missing something here? seems like I have a more technical issue/problem other than common Odin problems.

any help would be appreciated.
Attached Thumbnails
Click image for larger version

Name:	pic2.jpg
Views:	116
Size:	70.9 KB
ID:	2242264  
8th September 2013, 01:29 AM |#6  
studacris's Avatar
Recognized Contributor
Flag Nashville, TN
Thanks Meter: 4,068
 
Donate to Me
More
What it says is what yrs currently flashing. That's just where it's getting stuck
8th September 2013, 02:12 AM |#7  
OP Junior Member
Thanks Meter: 4
 
More
Quote:
Originally Posted by studacris

What it says is what yrs currently flashing. That's just where it's getting stuck

so is there any solution to this?

i tried it over again on another PC (Laptop)

i still get the same error where I get stuck:

<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I717UCMD3_I717ATTMD3_1117019_REV02_user_ low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> amss.bin
<ID:0/003> NAND Write Start!!

stuck here... no matter how long I wait i have been up all day long and found no solution online
The Following User Says Thank You to jeffcarp003 For This Useful Post: [ View ]
8th September 2013, 02:44 AM |#8  
OP Junior Member
Thanks Meter: 4
 
More
I will send $10 paypal donation to the website or to somebody that can help me revive my phone back to normal.

i am that desperate now. i have been up for almost 12 hours trying everything i could.

i am currently looking for a .pit file for Samsung Galaxy Note AT&T SGH-i717 cannot find it anywhere!
8th September 2013, 02:50 AM |#9  
studacris's Avatar
Recognized Contributor
Flag Nashville, TN
Thanks Meter: 4,068
 
Donate to Me
More
Are you using the same .tar everytime?
Try another package and see what happens.

Or... just flash a twrp.tar and just flash a custom Rom on that thing.
8th September 2013, 02:57 AM |#10  
OP Junior Member
Thanks Meter: 4
 
More
Quote:
Originally Posted by studacris

Are you using the same .tar everytime?
Try another package and see what happens.

Or... just flash a twrp.tar and just flash a custom Rom on that thing.

Yes: KIES_HOME_I717UCMD3_I717ATTMD3_1117019_REV02_user_ low_ship.tar.md5

i'll download an older version (ice cream sandwich)

i have not tried twrp.tar nor custom ROM

can you point me to a link to DL it?
8th September 2013, 04:14 AM |#11  
studacris's Avatar
Recognized Contributor
Flag Nashville, TN
Thanks Meter: 4,068
 
Donate to Me
More
If another stock package doesn't work here's Twrp
http://forum.xda-developers.com/show....php?t=1647575

Then you put a custom Rom of your choice I your sdcard and flash that within recovery.

Read More
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes