Post Reply

Okay, I need help and I feel dumb..

OP attbrandon

5th December 2013, 11:47 PM   |  #1  
OP Member
Thanks Meter: 60
 
78 posts
Join Date:Joined: Apr 2013
I rooted my s4 just to try it and I'm stuck trying to get it to go back to stock.

I have a note 3 now and I've got everything going well with that but the s4 (I have the I337).

I have it rooted and the phone will start and is a perfectly functional android phone, but whenever I try to get it into recovery mode I can only get it to go to download mode. Odin flashes to stock fail with this:

<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDB_I337ATTAMDB_I337UCUAMDB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)

the stock flash was linked to by others I found on XDA.

Also, details about the phone:

Jelly Bean 4.2.2
Baseband I337UCAMF3
Clockworkmod 6.0.4.4

Thanks for any and all help!
5th December 2013, 11:55 PM   |  #2  
Venom0642's Avatar
Recognized Contributor
Flag Laramie, Wyoming
Thanks Meter: 5,326
 
4,592 posts
Join Date:Joined: May 2012
Donate to Me
More
Quote:
Originally Posted by attbrandon

I rooted my s4 just to try it and I'm stuck trying to get it to go back to stock.

I have a note 3 now and I've got everything going well with that but the s4 (I have the I337).

I have it rooted and the phone will start and is a perfectly functional android phone, but whenever I try to get it into recovery mode I can only get it to go to download mode. Odin flashes to stock fail with this:

<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDB_I337ATTAMDB_I337UCUAMDB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)

the stock flash was linked to by others I found on XDA.

Also, details about the phone:

Jelly Bean 4.2.2
Baseband I337UCAMF3
Clockworkmod 6.0.4.4

Thanks for any and all help!

You cannot add a custom recovery to MF3 if the phone came with that firmware you will get hard brick

Sent From My Galaxy S4 SAMSUNG-SGH-I337 Running On New Deadly Venom v1.3.6 Jelly Bean 4.3

---------- Post added at 04:55 PM ---------- Previous post was at 04:51 PM ----------

Quote:
Originally Posted by Venom0642

You cannot add a custom recovery to MF3 if the phone came with that firmware you will get hard brick

Sent From My Galaxy S4 SAMSUNG-SGH-I337 Running On New Deadly Venom v1.3.6 Jelly Bean 4.3

I wish I could help more but I'm on the road hopefully someone will explain it better then what I mention.

Sent From My Galaxy S4 SAMSUNG-SGH-I337 Running On New Deadly Venom v1.3.6 Jelly Bean 4.3
6th December 2013, 12:26 AM   |  #3  
DeadlySin9's Avatar
Senior Member
Thanks Meter: 635
 
1,264 posts
Join Date:Joined: Sep 2012
Donate to Me
More
Because you are on MF3, the bootloader is locked and there is no exploit. Therefore, custom recoveries won't install. The reason ODIN is failing is because you are using the MDB files instead of MF3. It is impossible to downgrade the firmware back to any previous version. If you want a recovery, the most you can get is Safestrap, but make sure you read up plenty on it before you install it, as it is not a normal recovery and is not even installed to the recovery partition.
19th March 2014, 10:44 PM   |  #4  
Junior Member
Thanks Meter: 0
 
1 posts
Join Date:Joined: Mar 2014
need help
every time i try to reset my galaxy s4 att to stock it fails heres what it says



<OSM> Enter CS for MD5.. <OSM> Check MD5.. Do not unplug the cable.. <OSM> Please wait.. <OSM> I337UCUAMDB_I337ATTAMDB_I337UCUAMDB_HOME.tar.md5 is valid. <OSM> Checking MD5 finished Sucessfully.. <OSM> Leave CS.. <ID:0/005> Added!! <ID:0/005> Odin v.3 engine (ID:5).. <ID:0/005> File analysis.. <ID:0/005> SetupConnection.. <ID:0/005> Initialzation.. <ID:0/005> Get PIT for mapping.. <ID:0/005> Firmware update start.. <ID:0/005> aboot.mbn <ID:0/005> NAND Write Start!! <ID:0/005> FAIL! (Auth) <OSM> All threads completed. (succeed 0 / failed 1)
19th March 2014, 11:03 PM   |  #5  
megamanDJ's Avatar
Member
Flag New Orleans
Thanks Meter: 13
 
62 posts
Join Date:Joined: Jan 2014
More
Quote:
Originally Posted by ramiijabedd

every time i try to reset my galaxy s4 att to stock it fails heres what it says



<OSM> Enter CS for MD5.. <OSM> Check MD5.. Do not unplug the cable.. <OSM> Please wait.. <OSM> I337UCUAMDB_I337ATTAMDB_I337UCUAMDB_HOME.tar.md5 is valid. <OSM> Checking MD5 finished Sucessfully.. <OSM> Leave CS.. <ID:0/005> Added!! <ID:0/005> Odin v.3 engine (ID:5).. <ID:0/005> File analysis.. <ID:0/005> SetupConnection.. <ID:0/005> Initialzation.. <ID:0/005> Get PIT for mapping.. <ID:0/005> Firmware update start.. <ID:0/005> aboot.mbn <ID:0/005> NAND Write Start!! <ID:0/005> FAIL! (Auth) <OSM> All threads completed. (succeed 0 / failed 1)

Grab the MF3 Odin flashable tars and flash them the same way to get back to complete factory stock. Or you can get the MK2 tars and update to 4.3 and use Saferoot to easily get root since you already have drivers installed. Then look up how to install Safestrap for MK2, (which is really not too difficult), and TWRP v3.71to use as a recovery.
The Following User Says Thank You to megamanDJ For This Useful Post: [ View ]
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes