Major Update for the Sony Smartwatch 2 Brings DND and More

With the wearables landscape now dominated by Android Wear and Pebble, its … more

How to Root Android Wear 5.0.1 Lollipop Devices – XDA TV

The Lollipop update for Android Wear devices has hit the market and people are … more

Android 5.0.2 and New Factory Images For Nexus 7 (Wi-Fi) Available

Android 5.0 is has been publicly available since early November, and the … more

Github Tutorial App Shows You How to Use… Github

Github can get pretty complicated and using it can become quite daunting, especially … more

Welcome to XDA

Search to go directly to your device's forum

Register an account

Unlock full posting privileges

Ask a question

No registration required
Post Reply

Unhappy My Note 3 Bricked?? MJ7

OP Dr_Bunny

8th April 2014, 07:35 AM   |  #1  
OP Junior Member
Thanks Meter: 1
 
7 posts
Join Date:Joined: Feb 2013
I have this problem with my Note 3. So after 2 weeks I decided to flash a new rom. I rooted my device in a weird way using CF Auto Root. After flashing that using Odin I get a PASS but the device stayed stuck on Samsung Logo. Pulled the battery then boot into Download Mode then hit Restart. Everythings fine but the device wasnt rooted so I used Kingo to finish the root. Finally rooted properly so I flashed Omega Rom V6 for the N9005 model. Everything was fine but I noticed my Android OS was draining a bit of battery life so I decided to flash a new Kernel. The kernel I used was in Omega Files Pro but it was for a different baseband. MD3 or something like that...cant remember. (I KNOW THIS MY FAULT FOR FLASHING A DIFFERENT KERNEL) So after the reboot my device was working fine. But after turning it off and on my baseband went to UNKNOWN. So I tried flashing Stock kernel but didnt help. So I flashed Omega Rom V6 again and still no luck. I then flashed Original Stock Firmware from Sammobile. Got a PASS but the device kept turning on and after about 30 secs it would turn back off and on again for another 30secs..roughly. Flashed Stock Firmware again now I get a fail.....

My warranty is voided obviously because of root.

When I turn the device on normally i get this...

ODIN MODE
Product Name: SM-N9005
Current Binary: Samsung Official
System Status: Custom
Reactivation Lock: OFF
Knox Kernel Lock: 0x0
Knox Warranty Void: 0x1
Qualcomm Secureboot: ENABLE (CSB)
RP Swerv: S2, T2, R2, A2, P2
Write Protection: Enable

ODIN

<ID:0/012> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDMJ7_N9005VNZDMJ4_N9005XXUDMJ7_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> sbl1.mbn
<ID:0/012> NAND Write Start!!
<ID:0/012> aboot.mbn
<ID:0/012> rpm.mbn
<ID:0/012> tz.mbn
<ID:0/012> sdi.mbn
<ID:0/012> NON-HLOS.bin
<ID:0/012> boot.img
<ID:0/012> recovery.img
<ID:0/012> system.img.ext4
<ID:0/012> modem.bin
<ID:0/012> cache.img.ext4
<ID:0/012> hidden.img.ext4
<ID:0/012> FAIL! (Ext4)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/012> Removed!!

PLEASE HELP ME...
PLEASE

Im from New Zealand so the file is VNZ-N9005XXUDMJ7-20131129141810
Latest version out as New Zealand hasnt received 4.4.2 KitKat update as of yet.

I have successfully used this Stock Rom a few times with no problems...
8th April 2014, 09:09 AM   |  #2  
ultramag69's Avatar
Senior Member
Flag Waratah
Thanks Meter: 578
 
4,474 posts
Join Date:Joined: Nov 2007
Quote:
Originally Posted by Dr_Bunny

I have this problem with my Note 3. So after 2 weeks I decided to flash a new rom. I rooted my device in a weird way using CF Auto Root. After flashing that using Odin I get a PASS but the device stayed stuck on Samsung Logo. Pulled the battery then boot into Download Mode then hit Restart. Everythings fine but the device wasnt rooted so I used Kingo to finish the root. Finally rooted properly so I flashed Omega Rom V6 for the N9005 model. Everything was fine but I noticed my Android OS was draining a bit of battery life so I decided to flash a new Kernel. The kernel I used was in Omega Files Pro but it was for a different baseband. MD3 or something like that...cant remember. (I KNOW THIS MY FAULT FOR FLASHING A DIFFERENT KERNEL) So after the reboot my device was working fine. But after turning it off and on my baseband went to UNKNOWN. So I tried flashing Stock kernel but didnt help. So I flashed Omega Rom V6 again and still no luck. I then flashed Original Stock Firmware from Sammobile. Got a PASS but the device kept turning on and after about 30 secs it would turn back off and on again for another 30secs..roughly. Flashed Stock Firmware again now I get a fail.....

My warranty is voided obviously because of root.

When I turn the device on normally i get this...

ODIN MODE
Product Name: SM-N9005
Current Binary: Samsung Official
System Status: Custom
Reactivation Lock: OFF
Knox Kernel Lock: 0x0
Knox Warranty Void: 0x1
Qualcomm Secureboot: ENABLE (CSB)
RP Swerv: S2, T2, R2, A2, P2
Write Protection: Enable

ODIN

<ID:0/012> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDMJ7_N9005VNZDMJ4_N9005XXUDMJ7_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> sbl1.mbn
<ID:0/012> NAND Write Start!!
<ID:0/012> aboot.mbn
<ID:0/012> rpm.mbn
<ID:0/012> tz.mbn
<ID:0/012> sdi.mbn
<ID:0/012> NON-HLOS.bin
<ID:0/012> boot.img
<ID:0/012> recovery.img
<ID:0/012> system.img.ext4
<ID:0/012> modem.bin
<ID:0/012> cache.img.ext4
<ID:0/012> hidden.img.ext4
<ID:0/012> FAIL! (Ext4)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/012> Removed!!

PLEASE HELP ME...
PLEASE

Im from New Zealand so the file is VNZ-N9005XXUDMJ7-20131129141810
Latest version out as New Zealand hasnt received 4.4.2 KitKat update as of yet.

I have successfully used this Stock Rom a few times with no problems...

This looks like a carrier rom - "hidden" partition. Most of these seem to fail when flashing as the partition table is larger for these carrier roms... You need a pit file.
If you flashed another rom recently that wasn't carrier it may have reduced the partition table size so when you flash the carrier rom it no longer fits - this is just a theory..
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes