FORUMS

Which OEM Would You Like to Help?

Most manufacturers have moments of greatness and moments of decadence, and in the past few years … more

Root T-Mobile S6/Edge on 5.1.1 Without Tripping Knox

If you purchase phones from a carrier, you may be no stranger to the difficulties … more

IonVR Coming Soon, HTC M9 Dev Edition Gets Android 5.1 – XDA TV

The HTC M9 Developer Edition has received Android 5.1. That and … more

Android 5.1.1 Omni ROM For Motorola Xoom

Back in Feb 2011, the Motorola Xoom became the first device to be sold with Android 3.0 … more

Samsung Note n9005 AUSTRALIAN Help

722 posts
Thanks Meter: 594
 
By hashcheck, Senior Member on 10th October 2013, 03:40 AM
Post Reply Subscribe to Thread Email Thread
Help i have a Australian SM-N9005 and i rooted fine and flashed the Omega rom which worked perfectly. I decided to some of the other roms out there and after flashing ROM][XXBUMI7][V1.1][8/10][N9005] K.I.D.1412| Fast|Clean|Stable|battery life| now my phone just boot loops after intial Samsung Note 3 logo. I can get into CWM still and Odin Mode and have tried flashing Kernel, Recovery etc etc and also a few other roms with the same boot loop. Anyone know what would be going on?
 
 
10th October 2013, 04:55 AM |#2  
jetbruceli's Avatar
Senior Member
Flag Bamberg, Germany
Thanks Meter: 568
 
More
If that was happening to me. I would take out my Sd card and go into cwm wipe all! Then flash over stock with Odin

Sent from my SM-N9005 using XDA Premium 4 mobile app
10th October 2013, 05:34 AM |#3  
hashcheck's Avatar
OP Senior Member
Thanks Meter: 594
 
More
I ended up getting a swap over as the Aussie XSA Firmware not out yet. I'm not rooting mine again until more roms released and Aussies be careful flashing the roms already released
10th October 2013, 11:15 AM |#4  
VanHermiz's Avatar
Junior Member
Flag Melbourne
Thanks Meter: 2
 
More
I recently upgraded my Optus contract and picked up the note 3. It has Optus branding. Once the Australian XSA firmware is released am I able to flash over the Optus firmware via odin like we used to do with previous Samsung devices or am I going to trigger knox? I'm not fussed about root for now, I just don't want the Optus crap.
12th October 2013, 01:49 AM |#5  
Tobz's Avatar
Member
Flag Canberra
Thanks Meter: 7
 
More
Hey guys,

Any updates on if we can flash the sea firmware over the top via Odin?

Tobz
12th October 2013, 02:18 AM |#6  
Member
Thanks Meter: 2
 
More
Quote:
Originally Posted by VanHermiz

I recently upgraded my Optus contract and picked up the note 3. It has Optus branding. Once the Australian XSA firmware is released am I able to flash over the Optus firmware via odin like we used to do with previous Samsung devices or am I going to trigger knox? I'm not fussed about root for now, I just don't want the Optus crap.

There is one called SM-N9005 Australia 2013 October 4.3 N9005XXUBMI7 N9005XSABMI1
from sammobile.com

does it work?
I dont dare to flash yet... cos I dont want to lose my 2+1 years warranty.
12th October 2013, 02:44 AM |#7  
maidangisme's Avatar
Senior Member
Flag Homeless
Thanks Meter: 199
 
More
Knox and Region Lock better play safe, who knows after flash firmware from different region Our phone will become one of region locked phone.
-I wait for Devs figure out the way to disable Knox counter flag.
12th October 2013, 03:41 AM |#8  
Member
Flag Wollongong
Thanks Meter: 4
 
More
Quote:
Originally Posted by uccoffee.forum

There is one called SM-N9005 Australia 2013 October 4.3 N9005XXUBMI7 N9005XSABMI1
from sammobile.com

does it work?
I dont dare to flash yet... cos I dont want to lose my 2+1 years warranty.

I tried to flash this on my n9005 from Kogan (Phone come from Hong Kong) & it kept failing in odin right at the end.
I eventually had to do a firmware recovery with Kies to get it working again
Last edited by KTM690; 12th October 2013 at 03:54 AM.
The Following User Says Thank You to KTM690 For This Useful Post: [ View ]
12th October 2013, 08:38 AM |#9  
VanHermiz's Avatar
Junior Member
Flag Melbourne
Thanks Meter: 2
 
More
Quote:
Originally Posted by uccoffee.forum

There is one called SM-N9005 Australia 2013 October 4.3 N9005XXUBMI7 N9005XSABMI1
from sammobile.com

does it work?
I dont dare to flash yet... cos I dont want to lose my 2+1 years warranty.

I downloaded that from sammobile.com last night, I don't want to flash until I know it wont trigger knox. I've got 2 more years on this contract so warranty is important right now lol.

Quote:
Originally Posted by KTM690

I tried to flash this on my n9005 from Kogan (Phone come from Hong Kong) & it kept failing in odin right at the end.
I eventually had to do a firmware recovery with Kies to get it working again

Not sure but could be that your phone is region locked to Hong Kong and you're flashing firmware from another region? But then again I remember reading someone downloaded Unknown - XSI from sammobile and flashed it without having problems and it supposedly didn't trigger knox not sure what firmware he was on though.
Last edited by VanHermiz; 12th October 2013 at 08:48 AM.
12th October 2013, 12:13 PM |#10  
Senior Member
Thanks Meter: 35
 
More
If it's region locked it says so on the box

The Following User Says Thank You to Xalies For This Useful Post: [ View ]
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes