FORUMS

Nexus & Cookies: A More Focused Direction?

It is that time of the year again, and we are approaching the day where Android fans all over … more

LG G4 US Carrier Release Dates

The LG G4 was announced on April 29th with its Snapdragon 808 SoC, a welcomed change from its higher-end … more

Microsoft Reaches Pre-Install Agreement With New OEMs

As of late, Microsoft has been making a subtle but widespread play into the … more

Discover XDA: Discover Greater

We’ve all been there at some point in our XDA lives; we used to spend hours browsing over the … more
Post Reply Subscribe to Thread Email Thread

Storage [Q]_S5360, USB Device Not Recognized_ Help plz

12th April 2014, 10:48 AM |#1  
OP Junior Member
Thanks Meter: 0
 
More
I tried a ROM, and i fail, i can't turn on my phone (s5360), i must back my phone to STOCK ROM with Odin, but USB Device Not Recognized, i installed driver, help me
 
 
12th April 2014, 10:51 AM |#2  
TheFixItMan's Avatar
Recognized Contributor
Flag London
Thanks Meter: 2,878
 
More
follow the instructions on my thread
http://forum.xda-developers.com/show....php?t=2568853


if you have installed the driver correctly using rear usb ports if on a pc and set your phone to download mode correctly there is no reason why odin will not display com then a number in a coloured box under com:id which shows odin is connected and you have android adb device displayed in device manager
The Following User Says Thank You to TheFixItMan For This Useful Post: [ View ]
12th April 2014, 11:08 AM |#3  
OP Junior Member
Thanks Meter: 0
 
More
Exclamation thanks your help but it not work
thanks your help but it not work, i tried kies, it also not work
12th April 2014, 11:46 AM |#4  
TheFixItMan's Avatar
Recognized Contributor
Flag London
Thanks Meter: 2,878
 
More
Quote:
Originally Posted by gemnett

thanks your help but it not work, i tried kies, it also not work

you can not use kies to flash or restore firmware on galaxy y - it is not supported and kies is just not needed


if you have installed the usb drivers from the link in my thread (in compatibility mode if on windows 8/8.1) - are using a working usb cable rear usb ports on pc and correct split firmware from my thread it will work


unless you have a faulty usb port/cable it will be due to user error
12th April 2014, 11:47 AM |#5  
GalKill's Avatar
Senior Member
Reim Empire :P
Thanks Meter: 233
 
More
Quote:
Originally Posted by gemnett

thanks your help but it not work, i tried kies, it also not work

Are you boot into download mode already? If not , odin will not recognize your phone anyway
12th April 2014, 01:14 PM |#6  
wanyakuza's Avatar
Senior Member
Flag ipoh
Thanks Meter: 3
 
More
install samsung usb driver first n then connect your phone with download mode by usb

Note:make sure that usb driver is install properly before connect ur phone
12th April 2014, 02:14 PM |#7  
OP Junior Member
Thanks Meter: 0
 
More
.
Quote:
Originally Posted by marcussmith2626

you can not use kies to flash or restore firmware on galaxy y - it is not supported and kies is just not needed


if you have installed the usb drivers from the link in my thread (in compatibility mode if on windows 8/8.1) - are using a working usb cable rear usb ports on pc and correct split firmware from my thread it will work


unless you have a faulty usb port/cable it will be due to user error

i did it.. install the usb drivers from the link in your thread(win 8.1), put cable in rear sub port.. but still no working.... i give up
12th April 2014, 02:19 PM |#8  
OP Junior Member
Thanks Meter: 0
 
More
Post !!
Quote:
Originally Posted by GalKill

Are you boot into download mode already? If not , odin will not recognize your phone anyway

of course
12th April 2014, 02:23 PM |#9  
OP Junior Member
Thanks Meter: 0
 
More
Post @@
before that, i installed ROM cm7.2 with Kernel Percy@CM#2. but it fail and can't boot. recovery also no
12th April 2014, 02:25 PM |#10  
TheFixItMan's Avatar
Recognized Contributor
Flag London
Thanks Meter: 2,878
 
More
Quote:
Originally Posted by gemnett

i did it.. install the usb drivers from the link in your thread(win 8.1), put cable in rear sub port.. but still no working.... i give up

did you run the usb driver setup in compatibility mode?

right click the setup file
click properties
click compatibility tab
tick box to run in compatibility
select windows xp (service pack 2 will do)
apply
then run the setup

im using windows 8.1 and no problems with me
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes