GPS in settings, tomtom problem

---

I am trying to set up tomtom 5.21 with my BTGPS74 receiver but cant get the two to communicate. I know there is some settings you can change in settings/system/gps but the problem I have is I dont have the gps option in settings anywhere. Am I missing something? Does any on know what I should do. Tomtom wants me to use port 3 or 7 but when I try to set them in bluetooth settings it says its not possible check your settings. Any suggestions would b welcome. Thanks.
P.S I know the receiver works as it still works well with my N70.

GPS in settings, tomtom problem

---

...you should've gotten a GPS icon if software GPS recognized.
In rgister you can force simulation.

hklm\controlpanel\gps]
delete redirect and add 'group' with dword=2

Then GPS icon will appear.

I gave it programport 7,hardware 6, baudrate=57600
gps auto checked
I'm not sure about the settings...

I had to create incomming and outgoing com ports on my 3100 (not sure if you need both)??

TomTom used com port 9 and works like a dream
as soon as you start the programme it connects automatically as long as my receiver is on.

It even connects when the BT on the 3100 is turned off - it starts the BT automaticlally when tomtom runs!

Yeah i agree all you need to do is set up the com ports, then fire up tomtom and select the com port you just set up and away it goes

Chris

Thanks for the replies guys. I know I have to set the com ports but the problem I have is there is nowhere for me to do this. For some reason the gps settings is missing from the system/settings. I am going to try to reinstall tomtom to see if it helps. Tomtom has ports 3 and 7 showing but they seem to be taken by something else so I cant configure my receiver on either of them.

I have a slightly different problem... my TyTn can connect to the BT GPS reciever, but as soon as TomTom tries to calculate a route, or I click the GPS signal icon it crashes back to the Today screen...

I've got TomTom installed with 5.21 update, anyone had any problems like this?

you just need to pair your bluetooth device go to settings connections and bluetooth and add new device, let your tytn search and it will find a new device when you have paired it select new comm port outgoing

I have no gps setting in control panel either

Cheers

Chris

Hi,

i have a strange problem with my BT. I cant create a incoming or outgoing BT port. I dont know why but it wont let me create any ports.

Anyone with the same odd problem?

I had a similar problem, Tytn would only let me choose COM0 (Zero) as outgoing port, and TT works fine with it. However, I would like to add Mapking for Asia, and this navi soft will not accept a GPS on COM0. Anybody understands why Tytn is only offering COM0 as outgoing ports for GPS?

I have set the com4 as outgoing port and now tomtom seems to work fine.