Unbrick or Flash stock ROM of your iBall Slide 3G 7271
First of all, me nor my guide are not responsible of what may happen to your device...i just want to give some help for your bootlooped iBall Slide
DO FOLLOW THE INSTRUCTION CAREFULLY
Things that we need:
• USB Cable
• iBall Slide
• SP Flash Tools
• USB Vcom Drivers
Download it all here : Download all here : https://www.adrive.com/public/g5gV2M/Slide%203G7271
Extract “Driver – USB VCOM Driver.rar” on your desktop and don’t do anything
Connect your iBall Slide Tab and wait for it to install
Extract “iBall_Slide_3G7271_MT6577_V1.3@2013-04-23_16-35.rar” and “SP_Flash_Tool_exe_v3.1236.0.sn43.zip” on desktop
Open SP Flash Tool, then click Scatter-loading button to load the correct scatter file
(MT6577_Android_scatter_emmc.txt) and ignore any message that may appear.
(you can find it on the same folder)
Turn off your phone,
Check ONLY system.img (in this case I’ve checked recovery.img because I have to flash it on my own reason)
• After the red progress bar is complete, there will appear a purple progress bar.
Right after the purple progress bar is complete, a message will appear underneath it:
“Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
When the yellow bar is complete, you'll get a popup with a green circle and Download OK message,
which means that the process has been successfully terminated.
You can now safely disconnect your phone and turn it on. The process ends here.
Please note that, even though it isn't mandatory to select it on the list of images to flash,
preloader file must be present in the same folder as the other partition(s) that you want to flash, or else phone will not be able to enter into download mode.
Attention: Please follow the instructions carefully. I will not take any responsibility on whatever may happen with your phone.
Very important warning: Always make sure that you trust the sources of the ROM you download and know that it is meant for your phone.
After flashing a wrong preloader, your phone will be completely dead (can't be powered on, it will not charge and won't be detected anymore by the computer) and there is no way to recover it.
A618 and iBall Slide 3G7271
iBall Slide 3G 7271
-rom (stock rom)
-OS (Android Jellybean)
MyPhone A618 TV Duo
-rom (jS3 ROM made by me :3)
next for iBall Slide 3G 7271:
upgrading to Jellybean