Originally Posted by DrRammel
hey, I need your help:
I was on OmniROM and wanted to install B125, I installed B118 Recovery and got:
Checking Module Verlist...
Huawei SD card update fail
I tried several recoveries and firmwares, no luck.
then in one thread I saw that I have to flash boot.img and then recovery,img. done. and now my phone is stuck at splash screen.
I can enter recovery but it wont install anything.
Please quick help , it's 1:45 am here in germany and I need to get up at 6:30 and my P6 is my alarm!!!
Sorry to tell you, but from start you did a wrong step ! First if you was on OmniROM, you must flash ONLY stock recovery for KitKat and not for JB ! From here start all issues in your device !
To avoid any issue , when you use a custom rom based KitKat and you want to downgrade to JB , first you must put your device to Stock Huawei KitKat ( doesn't matter if is beta, B506 or B507 ) ! To install Stock Huawei KitKat - you must to flash stock recovery KitKat - and than flash UPDATE.APP from /dload folder ( where UPDATE.APP is stock firmware Huawei KitKat ) !
Now you should follow the intermediate steps to be able to downgrade to JB ( by installing aditional update.app )
Anyway good luck, and I hope you can solve this issue !
You can try this stuff :
First, use your PC with a new microSD to copy UPDATE.APP ( from Huawei KitKat ) in /dload folder !
and take stock recovery for Huawei KitKat ;
Put your microSD already prepared on your device and connect USB cable! Put your device in bootloader mode ( just keep pressing power button and volume down more than 10sec ) - now you should be able to flash stock recovery in your device > fastboot flash recovery recovery.img ; and reboot your device > fastboot reboot ! Right now you can reboot in stock recovery ( adb reboot recovery or using combo key ) and start flash UPDATE.APP !