[ROM][ODIN] SPH-L710 ND8 (ND8 Modem/Kernel/Bootloader/ROM - Full Restore - Unrooted)

Hey everyone - sorry this has taken so long to get posted. I've been out of town and am just getting back in and caught up.

First, a HUGE thanks goes @garwynn for working with me on all these one-clicks. Second, thanks goes to @DR_CDMA for posting the original TAR here.

This Odin One-Click.exe contains the Stock ND8 Bootloader, Kernel, Modem and ROM for the Sprint Samsung Galaxy S3 (SPH-L710). Yes, that means this comes with the full Knox Bootloader.

There has been no change to the ROM from the initial build released by Samsung.

This will NOT trigger the Yellow Triangle NOR will it increment the Odin flash count.

This one-click resets your whole phone to the stock ND8 experience, similar to a factory restore and it may wipe all data. It also contains the full bootloader and Knox.


Instructions:
1: Backup anything important and Disable any PINs.
During this process your phone's software will be returned to the Stock setup. All system data will be lost. To be safe, it is best to archive your backup off your phone, ie on your PC or Dropbox.

2: Install Samsung USB/Android drivers (if necessary).
Samsung Drivers Download Link

3: Download the ND8 Stock ROM One-Click.
SPH-L710_ND8_Full Restore_UNROOTED (Compressed Archive).exe (Resets user data)

4: Unzip One-Click ROM using 7zip (this package is a self-extracting exe you should just be able to double-click on it after download and it will do the rest).

5: Start the Odin One-Click.
Navigate to the location where the SPH-L710_ND8_Full Restore_UNROOTED.exe was saved upon extract from the 7Zip archive.
Double-click on SPH-L710_ND8_Full Restore_UNROOTED.exe. *On Vista or newer, you may need to right-click on the file and Run as Administrator.

6: Place phone in Download Mode.
- Power phone completely off.
- Press and hold Volume Down, Home and Power buttons, all at the same time.
- Release the buttons only when the ‘Warning!!’ message appears.
- Press [Volume Up] to enter Download mode.

7: Connect USB cable to PC and phone.
Odin should show a yellow COM port in the second column. If you do not see a yellow COM port, you may need to run the Odin One-Click as Administrator and/or unplug/plugin the USB cable after starting Odin One-Click.

8: Start Odin flash process.
Press [Start].

9: Complete - PASS!
Status should change to green PASS! At this point your phone should automatically reboot.

Android Instructions:
It is not recommended to flash this build using Mobile Odin. There have been reports of devices being hard bricked from doing so.

The boot process will take slightly longer than usual during which time you'll see the Sprint 4G logo screen.

Congratulations! You've flashed the Factory Restore ND8 build!