Originally Posted by vbansal89
Plz UPDATE us when u complete this little project
Okay heres my update: i did what i was planning to; unfortunately its not incredibly elegant.
I used a charging pad for note 2 which i bought on ebay. The copper tips i used as pins for the charging pad were a bit bigger than they should have been so my case is a little warped on that side. Also the pressure from the case makes the pins not have great contact with the phone so it takes little fidgeting to get it to start charging. Besides that though it works fine. I set it on the wireless charger at night and the phone is at 100% in the morning.
This weekend im gonna redo the soldering of the pins with some slightly smaller ones and see if i can make it... prettier.
The only thing to keep in mind is that +5v is the pin closest to the top of the phone and gnd is the bottom one. I also had to modify the charging pad to g3t the flap to come out higher up from the pad, otherwise I would have had to cover the flash.
Sent from my GT-N8013 using XDA Free mobile app