touch screen module driver needed..

10 posts
Thanks Meter: 0
By onasre, Junior Member on 2nd April 2014, 07:42 AM
Post Reply Subscribe to Thread Email Thread

I have a Kaser Netsgo YF730 Tablet .. that stuck on lock screen after firmware upgrade .. it needs the TS module driver . the mainboard shows it silead GSL3680 .. after searching the forum i came up with some suggestion , i tried all and downloaded the driver but it did not solve the problem all i found was gslx680 which many suggested it to include gsl3680 .. i extracted the gslx680 from many firmware's but no worked i do know what is the right module or what are the right variations on the gslx680 t is definitely
for the gsl3680 variant.

i wish the Kaser corp responded to my request of the orginal firmware .. i contacted them many times for couple weeks with no respond ..

My tablet info

A13-90A armv7 rev2 v71
Build: nuclear_evb-eng 4.0.4 IMM76D 20121218 test-keys
3.0.8+ kernel
android 4.0.4

The Curent firmware is based on CookedRom android 4.2.2

this is the gslx680 module i have curent now which is not working

this is the firmware i found very close to my orginal firmware i tried with livesuit and phonixcard with no luck either ..Failed on error 0x162
9INCH-TWA0910,GSL3680,DM-ARD06,RTL8188-IVVI-LOGO ( very very close to stock firmware )

Any idea ?

2nd June 2014, 12:14 AM |#2  
Junior Member
Thanks Meter: 0
try this
you have new board id from nuc
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes