Welcome to XDA

Search to go directly to your device's forum

Register an account

Unlock full posting privileges

Ask a question

No registration required
Post Reply

Smile [Q] HTC One unlocked, tampered, S-ON and custom recovery - Can I do OTA

OP Torcidas1950

27th May 2014, 08:48 PM   |  #1  
OP Member
Thanks Meter: 0
 
43 posts
Join Date:Joined: May 2014
Hi,

I have an HTC One PN07120. It is unlocked, tampered S-ON, has custom recovery installed, and is running AT&T 4.3 JellyBean stock.
In a few days Sense 6.0 OTA update will become available for my device, so I was wondering if I can just normally run the setup and update my system or I have to relock my device or something?

PLEASE RESPOND
27th May 2014, 09:07 PM   |  #2  
alray's Avatar
Senior Member
Flag Montreal, Quebec
Thanks Meter: 1,385
 
3,589 posts
Join Date:Joined: May 2012
Donate to Me
More
Quote:
Originally Posted by Torcidas1950

PLEASE RESPOND

http://forum.xda-developers.com/show...76&postcount=9
+ you need stock recovery, ota update will not flash using a custom recovery.

PLEASE SEARCH
Last edited by alray; 27th May 2014 at 09:13 PM.
The Following User Says Thank You to alray For This Useful Post: [ View ]
27th May 2014, 09:56 PM   |  #3  
OP Member
Thanks Meter: 0
 
43 posts
Join Date:Joined: May 2014
Quote:
Originally Posted by alray

http://forum.xda-developers.com/show...76&postcount=9
+ you need stock recovery, ota update will not flash using a custom recovery.

PLEASE SEARCH

So if I got you right, only thing that matters is that I have stock recovery instead of custom recovery. And how do I do that?
27th May 2014, 10:34 PM   |  #4  
alray's Avatar
Senior Member
Flag Montreal, Quebec
Thanks Meter: 1,385
 
3,589 posts
Join Date:Joined: May 2012
Donate to Me
More
Quote:
Originally Posted by Torcidas1950

So if I got you right, only thing that matters is that I have stock recovery instead of custom recovery.

Well yes and no, it depend what you did with your phone, read the link I have posted above, will not write all again

Quote:

And how do I do that?

flash stock recovery the same way you have flashed a custom one

Code:
fastboot flash recovery name_of_recovery.img
you need the recovery that match your present firmware #
28th May 2014, 02:30 AM   |  #5  
iElvis's Avatar
Recognized Contributor
Flag Modville
Thanks Meter: 1,902
 
3,767 posts
Join Date:Joined: May 2012
More
Quote:
Originally Posted by Torcidas1950

Hi,

I have an HTC One PN07120. It is unlocked, tampered S-ON, has custom recovery installed, and is running AT&T 4.3 JellyBean stock.
In a few days Sense 6.0 OTA update will become available for my device, so I was wondering if I can just normally run the setup and update my system or I have to relock my device or something?

PLEASE RESPOND

You should be fully stock, including recovery, before taking an OTA, except that you can (and should) stay s-off and unlocked. You may not even get the OTA otherwise.
28th May 2014, 02:24 PM   |  #6  
OP Member
Thanks Meter: 0
 
43 posts
Join Date:Joined: May 2014
So I think I have found the stock recovery needed for my device. Now there is a small problem, I have 2 stock recovery files for my device and I do not know wich one to choose because when I typed "fastboot getvar all" I didn't find any information at "version main", just blank space. How should I know wich one to pick?
Last edited by Torcidas1950; 28th May 2014 at 05:29 PM.
28th May 2014, 05:25 PM   |  #7  
OP Member
Thanks Meter: 0
 
43 posts
Join Date:Joined: May 2014
Quote:
Originally Posted by iElvis

You should be fully stock, including recovery, before taking an OTA, except that you can (and should) stay s-off and unlocked. You may not even get the OTA otherwise.

Quote:
Originally Posted by alray

Well yes and no, it depend what you did with your phone, read the link I have posted above, will not write all again



flash stock recovery the same way you have flashed a custom one

Code:
fastboot flash recovery name_of_recovery.img
you need the recovery that match your present firmware #

So I think I have found the stock recovery needed for my device. Now there is a small problem, I have 2 stock recovery files for my device and I do not know wich one to choose because when I typed "fastboot getvar all" I didn't find any information at "version main", just blank space. How should I know wich one to pick?
28th May 2014, 05:53 PM   |  #8  
nkk71's Avatar
Recognized Contributor
Flag Beirut
Thanks Meter: 3,110
 
6,261 posts
Join Date:Joined: May 2010
More
Quote:
Originally Posted by Torcidas1950

So I think I have found the stock recovery needed for my device. Now there is a small problem, I have 2 stock recovery files for my device and I do not know wich one to choose because when I typed "fastboot getvar all" I didn't find any information at "version main", just blank space. How should I know wich one to pick?

post your "fastboot getvar all" (excluding IMEI and s/n)
28th May 2014, 05:57 PM   |  #9  
OP Member
Thanks Meter: 0
 
43 posts
Join Date:Joined: May 2014
Quote:
Originally Posted by nkk71

post your "fastboot getvar all" (excluding IMEI and s/n)

Here it is:

(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.17.3250.20
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: xxxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3894mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-2da61e5e88
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
28th May 2014, 06:12 PM   |  #10  
nkk71's Avatar
Recognized Contributor
Flag Beirut
Thanks Meter: 3,110
 
6,261 posts
Join Date:Joined: May 2010
More
Quote:
Originally Posted by Torcidas1950

Here it is:

(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.17.3250.20
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: m7_ul
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001

(bootloader) commitno-bootloader: dirty-2da61e5e88
(bootloader) gencheckpt: 0

did you change radio?

hboot 1.55 + MID + CID would indicate you are on 3.xx.502.x version

so i guess: http://d-h.st/D8F or http://d-h.st/6bH would be a suitable recovery, but you need to have your phone's ROM 100% stock

Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes