Attend XDA's Second Annual Developer Conference, XDA:DevCon 2014!
5,782,778 Members 38,368 Now Online
XDA Developers Android and Mobile Development Forum

【issue】install CM-11 Android 4.4.4 [Stable v2.0][21 June] stuck in CyanogenMod screen

Tip us?
 
mx568549060@gmail.com
Old
#1  
Junior Member - OP
Thanks Meter 1
Posts: 15
Join Date: May 2014
Default 【issue】install CM-11 Android 4.4.4 [Stable v2.0][21 June] stuck in CyanogenMod screen

I install CM-11 Android 4.4.4 [Stable v2.0][21 June] use 4ext Recovery 1.0.0.6 RC3, full wipe except sdcard. In 4ext,it show install cm11 success,but when I reboot,it stuck in cyanogenmod screen. my hboot is HBOOT-1.27.1100....anybody know what is the problem????
 
Mile_zdr
Old
#2  
Mile_zdr's Avatar
Senior Member
Thanks Meter 268
Posts: 820
Join Date: Sep 2013
Location: Bitola
You are s-off or s-on?

Sent from my HTC Sensation 4G using XDA Free mobile app
HTC Sensation 4G T-Mobile USA
3.33 Firmware,S-off
Current Rom -ViperS 5.2.1 (4.1.2-Sense 5) Nothing is impossible!

Hit that Thanks button if in some way helped you
The Following User Says Thank You to Mile_zdr For This Useful Post: [ Click to Expand ]
 
mx568549060@gmail.com
Old
#3  
Junior Member - OP
Thanks Meter 1
Posts: 15
Join Date: May 2014
Quote:
Originally Posted by Mile_zdr View Post
You are s-off or s-on?

Sent from my HTC Sensation 4G using XDA Free mobile app
yes,s-off,unlock,hboot 1.29.0000 fireware:3.33
it stay at the CyanogenMod arrows around screen for 30 minutes...
 
rzr86
Old
#4  
rzr86's Avatar
Senior Member
Thanks Meter 2,022
Posts: 6,793
Join Date: May 2012
Location: Nafpaktos
Quote:
Originally Posted by mx568549060@gmail.com View Post
yes,s-off,unlock,hboot 1.29.0000 fireware:3.33
it stay at the CyanogenMod arrows around screen for 30 minutes...
flash the boot.img of the rom via fastboot command
fastboot flash boot boot.img

DEVICE: HTC Sensation Z710e
PREVIOUS ROM:Rooted Stock Rom ICS Sence 3.6 Revelation 1.0.3 JB Sense 4+ ViperS 3.1.4 JB Sense 4+
CURRENT ROM:ViperS 5.2.1 JB Sense 5 | Sense 6 Blinkfeed
FIRMWARE:3.32.401.5
PREVIOUS KERNEL:Overclocked kernel v1.5.2 by SebastianFM
CURRENT KERNEL:Liberty Kernel
BOOTLOADER:unlocked - S-OFF
HBOOT VERSION:1.27.0000
RECOVERY:4EXT recovery touch v.1.0.0.6 RC3
 
mx568549060@gmail.com
Old
#5  
Junior Member - OP
Thanks Meter 1
Posts: 15
Join Date: May 2014
Quote:
Originally Posted by rzr86 View Post
flash the boot.img of the rom via fastboot command
fastboot flash boot boot.img
thank u. I have done this,but it does't work....
 
Mile_zdr
Old
#6  
Mile_zdr's Avatar
Senior Member
Thanks Meter 268
Posts: 820
Join Date: Sep 2013
Location: Bitola
Quote:
Originally Posted by mx568549060@gmail.com View Post
thank u. I have done this,but it does't work....
try to redownload the rom maybe you have corupted rom file
HTC Sensation 4G T-Mobile USA
3.33 Firmware,S-off
Current Rom -ViperS 5.2.1 (4.1.2-Sense 5) Nothing is impossible!

Hit that Thanks button if in some way helped you
 
rzr86
Old
#7  
rzr86's Avatar
Senior Member
Thanks Meter 2,022
Posts: 6,793
Join Date: May 2012
Location: Nafpaktos
Quote:
Originally Posted by mx568549060@gmail.com View Post
thank u. I have done this,but it does't work....
then redownload the rom
check md5 sums
full wipe and flash

DEVICE: HTC Sensation Z710e
PREVIOUS ROM:Rooted Stock Rom ICS Sence 3.6 Revelation 1.0.3 JB Sense 4+ ViperS 3.1.4 JB Sense 4+
CURRENT ROM:ViperS 5.2.1 JB Sense 5 | Sense 6 Blinkfeed
FIRMWARE:3.32.401.5
PREVIOUS KERNEL:Overclocked kernel v1.5.2 by SebastianFM
CURRENT KERNEL:Liberty Kernel
BOOTLOADER:unlocked - S-OFF
HBOOT VERSION:1.27.0000
RECOVERY:4EXT recovery touch v.1.0.0.6 RC3
 
mx568549060@gmail.com
Old
#8  
Junior Member - OP
Thanks Meter 1
Posts: 15
Join Date: May 2014
Quote:
Originally Posted by rzr86 View Post
then redownload the rom
check md5 sums
full wipe and flash
ok,,,I reboot into recovery,use "adb shell","dmesg" show kernel log,,,I maybe know what's the problem.


~ # dmesg
dmesg
...
...
...
<3>[ 5.267850] msm_soc: create pcms
<6>[ 5.272153] asoc: CODEC_DAI <-> CPU_DAI mapping ok
<6>[ 5.284574] ALSA device list:
<6>[ 5.286222] #0: msm-audio (MSM-CARD)
<6>[ 5.288450] GACT probability NOT on
<6>[ 5.290098] Mirror/redirect action on
<6>[ 5.293668] u32 classifier
<6>[ 5.295255] Actions configured
<6>[ 5.296842] Netfilter messages via NETLINK v0.30.
<6>[ 5.300443] nf_conntrack version 0.5.0 (9010 buckets, 36040 max)
<4>[ 5.304593] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
<4>[ 5.307523] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
<4>[ 5.310392] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
<6>[ 5.313840] ctnetlink v0.93: registering with nfnetlink.
<6>[ 5.318174] xt_time: kernel timezone is -0000
<6>[ 5.323087] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 5.326291] arp_tables: (C) 2002 David S. Miller
<6>[ 5.330167] TCP cubic registered
<6>[ 5.333280] NET: Registered protocol family 10
<6>[ 5.344175] lo: Disabled Privacy Extensions
<6>[ 5.367307] Mobile IPv6
<6>[ 5.368955] IPv6 over IPv4 tunneling driver
<6>[ 5.377958] sit0: Disabled Privacy Extensions
<6>[ 5.388517] ip6tnl0: Disabled Privacy Extensions
<6>[ 5.392240] NET: Registered protocol family 17
<6>[ 5.395536] NET: Registered protocol family 15
<4>[ 5.398038] check_partition: Allocate memory for SD/eMMC card partition description (Once)
<6>[ 5.400998] mmcblk0:
<6>[ 5.408262] Bluetooth: L2CAP ver 2.14
<6>[ 5.411252] Bluetooth: L2CAP socket layer initialized
<6>[ 5.414487] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[ 5.417051] ######## bthid_init: ########
<6>[ 5.421628] ######## bthid_init: done ########
<6>[ 5.423276] ThumbEE CPU extension supported.
<4>[ 5.473356] local_clk_disable_reg: clock 33 status stuck at 'on' (bit 4 of 0xfe012fd4).
<4>[ 5.507047] local_clk_disable_reg: clock 72 status stuck at 'on' (bit 9 of 0xfe012fc8).
<6>[ 5.597623] clock_late_init() disabled 138 unused clocks
<4>[ 5.599943] p1 p2 p3 p4 <
<6>[ 5.608610] init_watchdog: dogbark processed by apps side
<6>[ 5.611814] MSM Watchdog Initialized
<4>[ 5.614377] p5 p6 p7 p8 p9 p10
<6>[ 5.641965] [Port list] init()
<6>[ 5.645688] [Port list] Virtual Address for port_list: [(null)]
<6>[ 5.647306] [Port list] Physical Address for port_list: [41E00000]
<6>[ 5.653959] [Port list] port_list is NULL.
<6>[ 5.655607] [Port list] packet filter is disabled.
<6>[ 5.666135] Acquire 'boot-time' no_halt_lock 60s
<6>[ 5.672910] cpufreq: cpu0 init at 310500 switching to 192000
<4>[ 5.674650] p11
<3>[ 5.676145] saw_set_voltage: msm_spm_set_vdd failed -5
<3>[ 5.676328] decrease_vdd: vdd_sc (cpu1) decrease failed (-5)
<6>[ 5.676511] cpufreq: cpu1 init at 310500 switching to 192000
<4>[ 5.676694] p12
<6>[ 5.677335] msm_sleep_stats: Initializing sleep stats for CPU[0]
<6>[ 5.677579] msm_sleep_stats: Initializing sleep stats for CPU[1]
<6>[ 5.677762] VFP support v0.3: implementor 51 architecture 64 part 2d variant 0 rev 0
<4>[ 5.683347] p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 >
<6>[ 5.700254] msm_sdcc_setup_vreg: Enabling SD slot power
<4>[ 5.705838] local_clk_disable_reg: clock 72 status stuck at 'on' (bit 9 of 0xfe012fc8).
<6>[ 5.754636] input: htc_headset as /devices/platform/pm8058-core.0/pm8058-othc.2/input/input9
<6>[ 5.757291] pm8058-rtc pm8058-rtc: setting system clock to 1970-01-01 00:02:22 UTC (86400)
<4>[ 5.757505] Warning: unable to open an initial console.
<6>[ 5.805539] [BATT] ID=1, level=10, vol=3300, temp=300, curr=0, dis_curr=0, chg_src=1, chg_en=0, over_vchg=0 at 5734570576 (1970-01-02 00:00:00.550413885 UTC)
<4>[ 5.819547] mmc1: high speed mode max_dtr = 50000000
<3>[ 5.819974] msm_sdc3_get_wpswitch:Failed to request GPIO 251
<4>[ 5.820066] mmc1: host does not support reading read-only switch. assuming write-enable.
<6>[ 5.820218] mmc1: new high speed SDHC card at address b368
<6>[ 5.820554] mmcblk1: mmc1:b368 00000 15.0 GiB
<6>[ 5.820981] mmcblk1: p1
<3>[ 5.891172] init: There is no cw property file /data/cw.prop.
<3>[ 5.892545] init: There is no cw property file /data/cw.prop.
<3>[ 5.892697] init: Unable to open persistent property directory /data/property errno: 2
<6>[ 5.893033] [Port list] Virtual Address of port_list: [(null)]
<6>[ 5.893125] [Port list] Physical Address of port_list: [41E00000]
<6>[ 5.893277] [Port list] port_list is NULL.
<3>[ 5.895413] init: no such service 'load-modem'
<6>[ 5.896207] [BATT] htc_batt_open: open misc device driver. at 5825115697 (1970-01-02 00:00:00.641020054 UTC)
<6>[ 5.896482] enabling adb
<7>[ 5.896726] [USB] android_enable_function: vendor_id=BB4,product_id=C86
<6>[ 5.896878] func_enable: set usb_configuration = 0
<6>[ 5.897092] [USB] msm72k_udc: ONLINE -> RESET
<6>[ 5.897184] [USB] reset controller
<6>[ 5.897245] [USBH] otg_reset
<6>[ 5.897336] [BATT] do charger control = 1 at 5826152700 (1970-01-02 00:00:00.642148557 UTC)
<6>[ 5.897580] [Port list] Virtual Address of port_list: [(null)]
<6>[ 5.897794] [Port list] Physical Address of port_list: [41E00000]
<6>[ 5.897946] [Port list] port_list is NULL.
<6>[ 5.898130] [BATT][tps65200] regh 0x00=2a, regh 0x01=29, regh 0x02=23, regh 0x03=8b
<6>[ 5.898313] adb_open
<6>[ 5.899076] [BATT][tps65200] regh 0x06=26, 0x08=0, regh 0x09=0, regh 0x0A=0
<6>[ 5.899869] [BATT][tps65200] Switch charger ON (SLOW): regh 0x03=83, regh 0x02=63
<6>[ 5.900083] [BATT] ioctl: battery level update: 38 at 5828989208 (1970-01-02 00:00:00.644863064 UTC)
<6>[ 5.900388] [BATT] Set lower threshold: 2800, upper threshold: 4400, Enabled:0. at 5829294209 (1970-01-02 00:00:00.645168065 UTC)
<3>[ 5.914426] pm_runtime: fail to wake up
<4>[ 6.074002] local_clk_disable_reg: clock 72 status stuck at 'on' (bit 9 of 0xfe012fc8).
<6>[ 6.083859] [USBH] otg_reset: mode:0x00000012
<6>[ 6.184079] [USB] ulpi: write 0x06 to 0x36
<6>[ 6.184171] [USB] ulpi: write 0x0c to 0x31
<6>[ 6.184262] [USB] ulpi: write 0x31 to 0x32
<6>[ 6.184354] [USB] ulpi: write 0x01 to 0x0e
<6>[ 6.184506] [USB] ulpi: write 0x01 to 0x11
<6>[ 6.184567] [USB] usb: notify offline
<6>[ 6.184751] [USBDIAG] diag_function_disable: dev=diag
<6>[ 6.184873] adb_release
<6>[ 6.185056] [USB] msm72k_pullup_internal: pullup
<6>[ 6.185117] adb_open
<6>[ 6.185300] [USB] msm72k_udc: RESET -> ONLINE
<6>[ 6.188291] [USB] suspend
<6>[ 6.188413] [USB] usb_get_max_power: type = 0, maxpow = 0
<6>[ 6.297238] [USB] reset
<7>[ 6.299497] [USBH] IRQ state: b_peripheral, otgsc = 0x01202e00
<7>[ 6.299588] [USBH] msm_otg_irq: portsc = 88000a05, sts = 20000084
<6>[ 6.299741] [USB] portchange USB_SPEED_HIGH
<6>[ 6.337613] [USB] reset
<7>[ 6.339871] [USBH] IRQ state: b_peripheral, otgsc = 0x01200e00
<7>[ 6.340024] [USBH] msm_otg_irq: portsc = 88000a05, sts = 20000084
<6>[ 6.340115] [USB] portchange USB_SPEED_HIGH
<6>[ 6.567105] mdp4_overlay_pipe_alloc: pipe=c06a8f74 ndx=1 num=0 share=0 cnt=0
<6>[ 6.567136] mdp4_overlay_update_dsi_cmd: blt_base=45c00000
<6>[ 6.580899] SHP: brightness orig=83, transformed=37
<6>[ 6.613675] pm8058_pwm_led_brightness_set: bank 1 brightness 1 +
<6>[ 6.613889] pm8058_pwm_led_brightness_set: bank 1 brightness 1 -
<4>[ 7.851952] local_clk_disable_reg: clock 72 status stuck at 'on' (bit 9 of 0xfe012fc8).
<3>[ 7.909050] init: untracked pid 168 exited
<6>[ 7.952446] EXT4-fs (mmcblk0p24): recovery complete
<6>[ 7.953850] EXT4-fs (mmcblk0p24): mounted filesystem with ordered data mode. Opts:
<3>[ 8.058006] EXT3-fs (mmcblk0p22): error: couldn't mount because of unsupported optional features (40)
<3>[ 8.059654] EXT2-fs (mmcblk0p22): error: couldn't mount because of unsupported optional features (44)
<6>[ 8.095177] EXT4-fs (mmcblk0p22): recovery complete
<6>[ 8.100181] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: (null)
<3>[ 8.101066] init: untracked pid 190 exited
<6>[ 8.382621] pm8058_led_currents_store: bank 6 currents 1 +
<6>[ 8.382744] pm8058_drvx_led_brightness_set: bank 6 brightness 0 +
<6>[ 8.383018] pm8058_drvx_led_brightness_set: bank 6 fade out brightness 0 -
<6>[ 8.383110] pm8058_drvx_led_brightness_set: bank 6 brightness 255 +
<6>[ 8.383415] pm8058_drvx_led_brightness_set: bank 6 brightness 255 -
<6>[ 8.383568] pm8058_led_currents_store: bank 6 currents 1 -
<6>[ 8.383812] pm8058_led_currents_store: bank 6 currents 6 +
<6>[ 8.383995] pm8058_drvx_led_brightness_set: bank 6 brightness 0 +
<6>[ 8.384178] pm8058_drvx_led_brightness_set: bank 6 fade out brightness 0 -
<6>[ 8.384453] pm8058_drvx_led_brightness_set: bank 6 brightness 255 +
<6>[ 8.384666] pm8058_drvx_led_brightness_set: bank 6 brightness 255 -
<6>[ 8.384819] pm8058_led_currents_store: bank 6 currents 6 -
<6>[ 8.385856] pm8058_drvx_led_brightness_set: bank 6 brightness 6 +
<6>[ 8.386161] pm8058_drvx_led_brightness_set: bank 6 brightness 6 -
<6>[ 8.386406] pm8058_drvx_led_brightness_set: bank 6 brightness 60 +
<6>[ 8.386680] pm8058_drvx_led_brightness_set: bank 6 brightness 60 -
<6>[ 8.386924] pm8058_drvx_led_brightness_set: bank 6 brightness 6 +
<6>[ 8.387230] pm8058_drvx_led_brightness_set: bank 6 brightness 6 -
<6>[ 8.387474] pm8058_drvx_led_brightness_set: bank 6 brightness 60 +
<6>[ 8.387687] pm8058_drvx_led_brightness_set: bank 6 brightness 60 -
<3>[ 8.558647] init: untracked pid 221 exited
<4>[ 8.584465] local_clk_disable_reg: clock 72 status stuck at 'on' (bit 9 of 0xfe012fc8).
<3>[ 8.827781] init: untracked pid 229 exited
<3>[ 9.110465] init: untracked pid 237 exited
<3>[ 9.397758] init: untracked pid 245 exited
<3>[ 9.680503] init: untracked pid 253 exited
<3>[ 9.967826] init: untracked pid 261 exited
<3>[ 10.254721] init: untracked pid 269 exited
<3>[ 10.541159] init: untracked pid 277 exited
<3>[ 10.828665] init: untracked pid 287 exited
<3>[ 11.115347] init: untracked pid 295 exited
<3>[ 11.402518] init: untracked pid 303 exited
<3>[ 11.689749] init: untracked pid 311 exited
<3>[ 11.972891] init: untracked pid 319 exited
<6>[ 12.001761] [DISP]init_complete_handler()
<3>[ 12.260397] init: untracked pid 327 exited
<3>[ 12.547842] init: untracked pid 335 exited
<3>[ 12.833700] init: untracked pid 343 exited
<3>[ 13.121358] init: untracked pid 351 exited
<3>[ 13.413320] init: untracked pid 359 exited
<3>[ 13.700795] init: untracked pid 367 exited
<3>[ 13.988301] init: untracked pid 375 exited
<3>[ 14.275838] init: untracked pid 383 exited
<3>[ 14.562764] init: untracked pid 391 exited
<3>[ 14.850453] init: untracked pid 399 exited
<3>[ 15.137562] init: untracked pid 407 exited
<3>[ 15.425404] init: untracked pid 415 exited
<3>[ 15.712330] init: untracked pid 423 exited
<3>[ 15.999745] init: untracked pid 431 exited
<3>[ 16.282948] init: untracked pid 439 exited
<3>[ 16.570667] init: untracked pid 447 exited
<3>[ 16.857716] init: untracked pid 455 exited
<3>[ 17.145038] init: untracked pid 463 exited
<6>[ 17.162830] android_usb gadget: high speed config #1: android
<6>[ 17.162922] adb_function_set_alt: maxsize = 512
<6>[ 17.163257] set usb_configuration = 1
<3>[ 17.635608] init: untracked pid 466 exited
<7>[ 18.035175] mmc_blk_issue_rqsd-qd)finish cmd(25) time=375976
<7>[ 18.035388] mmc_blk_issue_rq: ---(sd-qd) start sector=23732, size 9, total time=376190 microseconds
<4>[ 18.382006] local_clk_disable_reg: clock 72 status stuck at 'on' (bit 9 of 0xfe012fc8).
<4>[ 19.791978] local_clk_disable_reg: clock 72 status stuck at 'on' (bit 9 of 0xfe012fc8).
<6>[ 20.373581] [BATT] ID=2, level=38, vol=3756, temp=394, curr=0, dis_curr=98, chg_src=1, chg_en=1, over_vchg=0 at 20302010771 (1970-01-02 00:00:15.117823522 UTC)
<6>[ 38.080825] [BATT] ID=2, level=38, vol=3756, temp=394, curr=0, dis_curr=98, chg_src=1, chg_en=1, over_vchg=0 at 38009286160 (1970-01-02 00:00:32.825098911 UTC)
<6>[ 60.279554] S1@552,673
<6>[ 60.340620] Release 'boot-time' perf_lock
<6>[ 60.374067] [VIB]recovery(parent:recovery): vibrates 28 msec
<6>[ 60.374342] [ATS][set_vibration][successful]
<6>[ 60.376204] E1@555, 673
<6>[ 60.402266] [VIB]pmic8058_vib_timer_func
<4>[ 65.181989] Thermal: failed to read out thermal zone 1
<6>[ 65.661939] Release 'boot-time' no_halt_lock
<6>[ 66.036725] [BATT] ioctl: battery level update: 38 at 65965951170 (1970-01-02 00:01:00.780970465 UTC)
<6>[ 66.038251] [BATT] ID=2, level=38, vol=3867, temp=393, curr=351, dis_curr=0, chg_src=1, chg_en=1, over_vchg=0 at 65967477049 (1970-01-02 00:01:00.782496343 UTC)
<6>[ 66.218549] pm8058_pwm_led_brightness_set: bank 0 brightness 0 +
<6>[ 66.218671] pm8058_pwm_led_brightness_set: bank 0 brightness 0 -
<6>[ 66.237012] pm8058_pwm_led_brightness_set: bank 1 brightness 1 +
<6>[ 66.237165] pm8058_pwm_led_brightness_set: bank 1 brightness 1 -
<6>[ 66.245191] pm8058_pwm_led_brightness_set: bank 0 brightness 0 +
<6>[ 66.245313] pm8058_pwm_led_brightness_set: bank 0 brightness 0 -
<6>[ 66.253187] pm8058_pwm_led_brightness_set: bank 1 brightness 1 +
<6>[ 66.253370] pm8058_pwm_led_brightness_set: bank 1 brightness 1 -
<6>[ 66.261243] pm8058_pwm_led_brightness_set: bank 0 brightness 0 +
<6>[ 66.261365] pm8058_pwm_led_brightness_set: bank 0 brightness 0 -
<6>[ 66.269269] pm8058_pwm_led_brightness_set: bank 1 brightness 1 +
<6>[ 66.269422] pm8058_pwm_led_brightness_set: bank 1 brightness 1 -
~ #
 
mx568549060@gmail.com
Old
#9  
Junior Member - OP
Thanks Meter 1
Posts: 15
Join Date: May 2014
Quote:
Originally Posted by rzr86 View Post
then redownload the rom
check md5 sums
full wipe and flash
the init progress is broken

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes


Twik Keeps Your Accounts Secure with Randomly Generated Passwords

If youre one of thosewho find it just an impossible task to keep trackof … more

Moto G 4G Receives Official CyanogenMod 11 Love

When theMoto Gwas initially released to the world in November of last year,very few actually … more

Get Your Tasks Organized on Android Wear with Agenda Wear

Having a checklist of things you need to do is something we all can find useful at … more

Top 5 LG G3 MODs – XDA Developer TV

The LG G3 has been LG’s breakout hit of the summer. Using their knowledge frombuilding some … more