Silicone Case in 5 Colours At Last for Mda Compact 3,o2 Orbit,htc P3300

---

need to protect your MDA COMPACT 3,O2 ORBIT,HTC P3300 ,well here you go

http://cgi.ebay.co.uk/ws/eBayISAPI.d...6186&rd=1&rd=1

Hi madjid,

Do you have any pics of the XDA Orbit in a white and in a black case ???

I seem to think it will look OK in a black case but am interested in what it looks like in white..

Cheers

Gaz

Yes I'd also like to know if it will be a perfect fit for the O2 XDA Orbit as it is a different shape to the Artemis and it's varients.

Really want one but need to make sure it will fit well!!!!

hi as per email n ebay
i need to see the black case both frotn and back with the phone inside or not...
also the pic you showed is that the white one or the grey one???

More Pictures and what it looks like in the orbit hope this helps

---

Hi to all , as requested I did put the pictures for you in the site , more of them for the orbit as a lot of you want to know if it fit it normal,to me I have both orbit and mda compact 3,its the same fitting since the button are the same,but again the choice is yours you decide.

here is the link for the pictures
http://www.sidiplus.co.uk/ipaq.htm

and this one when you happy to go ahead
http://www.sidiplus.co.uk/Hot%20Deal%20Bargains.htm

Also they very good if you use a car windscreen holder (cheap one under £10 they are magnetic holders from ebay),I personally use one and I put the metal bit under the case, you dont even have to stick it to your phone and its firm.
Its better than buying the original one and taking the silicone off each time you plug it in.

Any questions just ask.
Thanks to all

Hi Madjid, both links are the same mate. No pictures.

Originally Posted by Grogo

Hi Madjid, both links are the same mate. No pictures.

they should be working now

Thanks. I'll try the black then with the orbit. What about the holder that shows in the pictures. I couldn't find any on the site.

As for the magnetic bit...and the metal bit, I really didn't understand anything.

Nevermind about the picture of the holder, I did find the other post about it.

Originally Posted by Grogo

Thanks. I'll try the black then with the orbit. What about the holder that shows in the pictures. I couldn't find any on the site.

As for the magnetic bit...and the metal bit, I really didn't understand anything.

Nevermind about the picture of the holder, I did find the other post about it.

Hi, the holder that I was talking about is like one of those
http://cgi.ebay.co.uk/MAGNETIC-SUCTI...QQcmdZViewItem
And the metal bit is the small bit you see in the picture,you just put the metal bit between the case and the pda,so there is no need to take the selicone case each time you use it in the car mount.