mtty.exe not working!!!

---

Hello!

Where I can download mtty for Trinity?

http://wiki.xda-developers.com/uploads/mtty.exe not working!!!!

Hello, so that its it functions is necessary to neutralize (wcescomm.exe) ActiveSync and then to select port USB in mtty.exe.

I have SPL-1.01 MFG, but......

USB> task 32
Level = 0
Cmd>lnb C:\finalsplash.nb 500e0000

:F=C:\finalsplash.nb
:A=501A0000
:eek:=00000000
:L=FFFFFFFF

start NB image download

On this step, process stoped

BE WARNED THIS ROM ADDRESSES ARE FOR HERMES, NOT FOR TRINITY... flashing the wrong address can brick your device!

you have to use mtty 1.16 for the lnb command to work.

Take it from here:
ftp://xda:xda@ftp.xda-developers.com...01MFG_Pack.zip

Originally Posted by pof

BE WARNED THIS ROM ADDRESSES ARE FOR HERMES, NOT FOR TRINITY... flashing the wrong address can brick your device!

Say me, please ROM adress for Trinity!

Sorry, my English very bad....

Originally Posted by lvsw

Say me, please ROM adress for Trinity!

sorry I don't have a Trinity and I don't know what is the ROM layout on it, you can investigate yourself capturing the output of the RUU while flashing a rom with usb monitor, dumping rom parts with rbmc bootloader command, and dumping mmu and parts of mem from gnuharet... but it's a long process until you manage to get all the addresses correctly. You have to compare what you get from the device with the *.nb file extracted from the NBH to see where each part of the ROM starts. Can't really do this without having a Trinity on my hands

Problem using mtty

---

I have some ploblems using mtty.... I deselect "connect to USB" in pc activesync, then I connect the pocket pc on the usb cable, then I start mtty and I select USB.... I have a the mtty window in which is written CLIENT then, again, CLIENT, and the pocket pc... CONNECTING TO USB... and this situation remain without any changement.... where I am wrong?

Originally Posted by pof

you have to use mtty 1.16 for the lnb command to work.

Actually, the LNB command must be implemented in the bootloader to work. If you connect to Trinity using any version of MTTY (from 1.10 to 1.46) and type LNB, it will just give an "Command error!!!" message.

yes, but seems to be implemented on the MFG bootloader version that is left on the device after unlocking it with imei-check unlocker, isn't it?