How we can reset call timer's???

---

Any one know how we can reset the call timer's on trinity device's??

Thank's..

Try a search in the Hermes thread. I've seen it there before and its possible it will work with this device. It's a matter of running a couple commands in the bootloader to reset the call timer data.

hi, look at THIS thread, it is at least two way, how to reset, one via bootloader and MTTY and second one throught playing with time... njoy, and give us feedback, if it help, or not.

Originally Posted by sinmae

hi, look at THIS thread, it is at least two way, how to reset, one via bootloader and MTTY and second one throught playing with time... njoy, and give us feedback, if it help, or not.

Thank's but on trinity with spl 1.7 you can't use the rtask b command.
tyask b command can only used for 1.01mfg spl provided by payed cid unlocker...

USB> rtask b
0 <--- wait until you see a "0" here
ate1 <--- enable local echo
atv1 <--- verbose output for return values
AT@talk?1 <--- get outgoing call time
AT@talk?0 <--- get incoming call time
AT@TALK=<value1>,<value2> <--- set incoming and outgoing call

The question is..
Is there any other away to reset call timer's??
If i use the 1.01mfg spl can i reset the call timer's??

Thank's for your time...

Ok so i successful reset the call timer's on my trinity.

You nead 1.01 bootloader mfg (payed cid solution)

And this code on mtty:

1) put device in bootloader mode
2) disable activesync usb connections
3) connect to bootloader using mtty.exe
4) when you see "USB>" prompt type this (DO NOT COPY-PASTE):

Code:

USB> rtask b
0 <--- wait until you see a "0" here
ate1 <--- enable local echo
atv1 <--- verbose output for return values
AT@talk?1 <--- get outgoing call time
AT@talk?0 <--- get incoming call time
AT@TALK=270F,270F <--- set incoming and outgoing call


Thank's to all...