Advantage and Jabra BT8010

---

Hi:
I can’t manage my Jabra (BT8010) to show caller ID, even with JETware (v1.30).
I recently made the upgrade on Jabra to V 1-33-0 and still can get caller id to function.
Anybody have a solution?
Thanks.

Originally Posted by dtread1

Hi:
I can’t manage my Jabra (BT8010) to show caller ID, even with JETware (v1.30).
I recently made the upgrade on Jabra to V 1-30-0 and still can get caller id to function.
Anybody have a solution?
Thanks.

you need to reset the Jabra to factory default and pair them again

Originally Posted by wu5262

you need to reset the Jabra to factory default and pair them again

Thanks for your hawser, but I did as you say, and the Jabra display only shows the number that is calling not the name that is in my contact list.
Could it be something that went wrong in the first boot of the Advantage?

Hi,

The Jabra can't look into your contacts on your PDA. It shows the number(caller-id). But you can add names into your Jabra BT8010 with theconfig software(you can donload it from the Jabra site). If I'm correct then you can add up to 20 names and numbers. When the BT8010 recognizes the caller-id and it matches the internal list of names/numbers, the it will show the name on the display.

Originally Posted by dtread1

Thanks for your hawser, but I did as you say, and the Jabra display only shows the number that is calling not the name that is in my contact list.
Could it be something that went wrong in the first boot of the Advantage?

no, shouldn't be, btw, you need to have the caller ID function turn on from Jetware. Now delete the bluetooth headset from your device, software restart, reset your bluetooth headset to factory default, then pair again. Hope this will works

Originally Posted by dpbakker

Hi,

The Jabra can't look into your contacts on your PDA. It shows the number(caller-id). But you can add names into your Jabra BT8010 with theconfig software(you can donload it from the Jabra site). If I'm correct then you can add up to 20 names and numbers. When the BT8010 recognizes the caller-id and it matches the internal list of names/numbers, the it will show the name on the display.

are you sure about this? if it's true, then it's quite bad. I am using iTeck clip D, and i can have all my contact shown on my headset with their name, no limit and don't need to do anything.

Originally Posted by dpbakker

Hi,

The Jabra can't look into your contacts on your PDA. It shows the number(caller-id). But you can add names into your Jabra BT8010 with theconfig software(you can donload it from the Jabra site). If I'm correct then you can add up to 20 names and numbers. When the BT8010 recognizes the caller-id and it matches the internal list of names/numbers, the it will show the name on the display.

Forgive me but I don’t think it works like you said “The Jabra can't look into your contacts on your PDA”
IMHO, is the Advantage software that should “send” the caller id (name) to the Jabra.
That’s watt JETware does with several hands free devices like Parrot, etc.
As wu5262 said, and if the software is compatible, the caller id (name) must appear in headset as long as you have them in your contact list on the pda/phone.
I thing I’m going to do a hard reset in the Advantage to see if it works ok.
In the mean wile if anybody finds the solution, it will be welcome.
Thanks again

Originally Posted by dtread1

Forgive me but I don’t think it works like you said “The Jabra can't look into your contacts on your PDA”
IMHO, is the Advantage software that should “send” the caller id (name) to the Jabra.
That’s watt JETware does with several hands free devices like Parrot, etc.
As wu5262 said, and if the software is compatible, the caller id (name) must appear in headset as long as you have them in your contact list on the pda/phone.
I thing I’m going to do a hard reset in the Advantage to see if it works ok.
In the mean wile if anybody finds the solution, it will be welcome.
Thanks again

good luck with your try, just to let you know, it took me a while to get mine working, you might have to play around with the Jetware advance setting, i have the voice dialing and suspend after call disable, the others are all on. And also i am using version 1.2, the beta version doesn't work for me. And remember you need to factory default and pair the headset again when you done with changes.

Originally Posted by wu5262

are you sure about this? if it's true, then it's quite bad. I am using iTeck clip D, and i can have all my contact shown on my headset with their name, no limit and don't need to do anything.

Hi,

I just tested it (again). Or it shows the caller-id or the name stored in the Jabra BT8010. So you don't see the name stored in your (PDA)contactlist corresponding with the caller-id

Originally Posted by wu5262

are you sure about this? if it's true, then it's quite bad. I am using iTeck clip D, and i can have all my contact shown on my headset with their name, no limit and don't need to do anything.

Whats the "iTeck clip D"?