Htc Breeze Test Sspl

---

So, guys, here is the first test SSPL for breeze. I have no breeze, so please report if it works.
extract to your device root!!!
start spl.lnk AND immediately press POWER and CAMERA buttons. (or try hust CAMERA)
if the screen shows sth like spl 1.01 DFR, then everything is ok - it is my spl
this version was intended to allow you to flash any CID rom update and unsigned nbh files. the next release will be based on the latest spl and include compatibility with new RUU of 1.34 rom updates and the feature to fix bad blocks.

EDIT - may 10, 2007 - SSPL V1 works successfully
CID check - disabled
NBH check - disabled

attached spl in nbh format for flashing - breeimg.zip

Thanks to:
DES for his SSPL
Olipro for his hard spl which actually saved me from hours of IDA analysing - I simply compared his spl to original and patched the one from breeze

at first try...

i have exactly what i descriped here:

http://forum.xda-developers.com/show...&postcount=782

after the reboot i can't get into the bootloader...

what did you changed in the spl ?! or in the sspl.exe ??

I try... It's WORK!!!!!

what did you do??

edit:
ok, strange things goes on here ... just tryied it another time yet...

ipl-sspl by Des
SPL-1.01

should work

if i have time today i will try to made an cooked rom ...

if this works i look for a way to extract the files out of the excalibur wm6 rom ...

edit2:

i now have the problem that i can't connect mtty to bootloader... mtty ends with error when producing the cmd command line... i just had this problem with hermes to... i have 2 mtty version on all the 2 the same error...

i will try it now on a other machine..

1) Rename the BREEZE_HTCEUR_1.34.251.1_SHIP.nbh file to BREEIMG.nbh
2) Copy to sd card
3) start spl.lnk and immediately press POWER and CAMERA buttons
4) Phohe start in bootloader and flash new rom. (but no new radio)

THX

---

Thx for the replies, i`ll try to make a newer sspl. also, let`s begin the work for wm6 for breeze based on hermes rom... but in another thread some time later

can anyone confirm that they have sucessfully flashed a cooked ROM onto a breeze? Please update the wiki.

Originally Posted by doedoe

can anyone confirm that they have sucessfully flashed a cooked ROM onto a breeze? Please update the wiki.

Hi, i work on it!!

on afternoon/evening i will try to cook a rom with a few freeware tools bases on the actuell rom!!

i can begin working on wm6 rom recently when extract the excalibur content... because of the problem that breeze is a smartphone an hermes a ppc there would be some problems with coredll's of the system! because of that i need smartphone wm6 rom... befor that there is no wm6 on breeze possible!

....

can anyone else can try mtty with the sspl ?

-----

Originally Posted by engel98

1) Rename the BREEZE_HTCEUR_1.34.251.1_SHIP.nbh file to BREEIMG.nbh
2) Copy to sd card
3) start spl.lnk and immediately press POWER and CAMERA buttons
4) Phohe start in bootloader and flash new rom. (but no new radio)

this should work when you have a new spl installed - and you want to flash another cid rom!!

has nothing to do with unsigned code!!

!!! only for understanding!!

hey what should i say...

it just look like that it works...

i have cooked a rom now...

only small reg changes!!

i have flashed it with hermes RUUUpdaterV2

only a OS file!

Phone boots! now i have to check if the changes are taken over!!

But why not ;Þ

Please post to the wiki.

I am hoping that we can use tornado WM6 code to cook a WM6 image...