white screen after upgrade

---

I tried to upgrade to new wm6 italian roms but after upgrade finishes the p3600 doesn't make auto boot, pressing reset the device start booting and show the first scree but after the screen becomes white and stop going on.
The only rom working is this from lwsw wm6.
All other roms (mun, italians translated) after the upgrade the system doesn't finish first boot and remains white.
I can enter in bootloader pressing on+camera+reset and install italian wm5 gps enabled rom or lwsw wm6 english rom, but no one of the others.
I tried also sspl.trin and hard spl but without success.
What can do to let the upgrade finalize with italian or mun's wm6 roms?
Thanks

no one that happened the same and solved it?

+1 help please

Originally Posted by dreambox

+1 help please

I think you have to use mtty.exe to unlock the device!!!
first have to flash Hardspl, rebbot, then:
disable activesync, enter in bootloader and run mtty from pc, select usb port and flag yes on "local echo"
then press ok, a terminal white window appear
press "enter"
and appears "cmd>" then write:
info 2

then you write task 2a
if there are some memory Bad block, they will be adhusted!!!
reenter in bootloader, reflash with original WM5 italian and try if the old "original" OS works!!
last luigi.ing release of italian rom causes same problem to my device, after theese operations it retunded to work!!! :)
bye!

same problem here, after last "ing" upgrade... now trying to upgrade with udk.. my PS trin is supercid

UPDATE: Udk seems to work fine! It bringed to life my trin!!

Originally Posted by ervius

I think you have to use mtty.exe to unlock the device!!!
first have to flash Hardspl, rebbot, then:
disable activesync, enter in bootloader and run mtty from pc, select usb port and flag yes on "local echo"
then press ok, a terminal white window appear
press "enter"
and appears "cmd>" then write:
info 2

then you write task 2a
if there are some memory Bad block, they will be adhusted!!!
reenter in bootloader, reflash with original WM5 italian and try if the old "original" OS works!!
last luigi.ing release of italian rom causes same problem to my device, after theese operations it retunded to work!!! :)
bye!

is there something to do after launching task 2a ? because i still have the white screen problem after

Edit : here is what i have on my screen

Cmd>task 2a
Check block : 75 - Bad

Check block : 76 - Bad

Check block : 915 - Bad

what command must i launch ?

there is a way to flash roms with mtty this solves bad dlocks usage, but i don't find how to do it anymore, someone ca give me instructions on how to use mtty for flashing my trinity?
Thanks

Spanish problem

---

+1 help

Con la versión 2.3 ES me pasa lo mismo.

La única que funciona bien es "LVSW_Trinity_WM6_v2.0.1.1"

+1
"LVSW_Trinity_WM6_v2.0.1.1"

Problem With Flashing

---

Also to me making all the procedure to the fine ones they give an error to me Cmd>task 2A Check block: 329 - Working Bad
and the only one rom is wm6 the 2.0.1.1