Bluetooth headset issue

---

Hi, who has problems with his Bluetooth headset after the WM6 upgrade?
My Bluetooth headset used to start looking (by beeping) for the last connected device when I power it on. It doesn't do that while paired with my X7500 WM6. It does start looking MANUALLY when I press the call button on the headset and when it's connected (you see the headphones icon in the phone screen appear), it only stays that way for a few seconds. The headphones will disappear again and the connection has been lost.
When I then push the headset call button again, it starts looking again, connects again, and then disconnects again after a few seconds.

I first thought it was the headset, but it works just fine on all other devices I have, but just not the X7500 anymore. I'm sure it has something to do with the WM6 upgrade, because it was working the proper way while running WM5.

Any tips or suggestions??

The icon disapears, but calls still go through to it when they come in for me.

Have you checked to make sure it doesnt actualy work when an incoming call arrives? the icon is misleading.

No, the connection is lost when the icon has been disappeared, because the headset will start reconnecting/looking for the device when I press the headset call button.
If it was still connected it should initiate the voice speed dial.

strange, i have many headsets and dont have that problem with any.

I do have it randomly stop talking to the headset at all, and require a delete/repair, (one headset still wont connect, but i think its a crap headset issue). but when paired, they normaly behave afterwards.
Im on wm6 btw.

BUMP. This has been happening for me since my WM6 upgrade.

HBH-PV720
AMEO with HTC WM6

Please can anyone can help with this ?

DiGRem

Delete and pair

---

I have had issues with several Nokia phones when upgrading firmware. The other bluetooth units, previously paired with the phone, still thinks that they should be paired after the upgrade. Only issue is that the phone has totaly forgotten of all paired devices. This resulted in many connection errors, when the peripherals wanted to connect, but the phone refused. Can you somehow reset the headset? Delete the pairing on the phone, pair the headset with another phone/pc, and then, re-pair it with the athena again. Just to make sure that it has no old pairing info.

-Johan