The one and only MS Smartphone Web Browsing Bible

[Menneisyys]

1.5.2 Toonel

Toonel, the transparent compressor proxy, is a GREAT way to save data usage costs. If you don’t have an unlimited data plan, you really should check it out by, first, reading my related article & tutorial HERE. I’ve published several articles and tips on Toonel; the just-linked one is the one to start with.

While, it seems, it’s not possible to make the native Windows Mobile version work, the Java versions does work on Smartphones.

As far as the native Windows Mobile version is concerned, according to the folks HERE (thanks for the link to the Toonel folks; it's Russian - Babel "translation" HERE), some people managed to make the native (.NET CF) version of Toonel run. I haven’t succeeded in this on either of my Oxygen or Vox.

Fortunately, the Java version works. In general, you’ll only need the (brand new) CrEme 4.12 (download the TI OMAP version of the 4.1 series if you have a TI OMAP-based Smartphone) and THIS JAR file (version 0.45 - do NOT use version 0.50!). Install CrEme (you can do this on the storage card too – then, however, you’ll need to modify the link file I give you), copy the JAR file to the root directory of your handheld (you can, actually, copy it anywhere – but, then, you’ll need to modify the link file I will give you soon) and, then, copy THIS link file to \Windows\Start Menu. Then, just click the latter to start Toonel in the background. Upon start, you should see THIS screen. If you see THIS (note the bind() failed message!), it shows Toonel is already running.

Note that the CrEme process takes quite a lot of memory (but, fortunately, little CPU time – about 1-2% - when inactive) as can be seen in HERE. Beware of this fact – the operating system may kill the CrEme (Toonel) process in the background, particularly if you start other, memory-intensive programs. Then, you will just need to restart the proxy by clicking the startup script.

As, currently, the SP version of Opera Mobile (as with old 8.60 Pocket PC builds) doesn’t have internal support for entering proxy servers, you must enter the proxy information in the config file by hand. However, as with the old PPC betas, you can easily configure the proxy server by just editing \Application Data\ Opera\ opera.ini and adding the following section:

[Proxy]
Use HTTP=1
HTTP server=127.0.0.1:8080
Enable HTTP 1.1 for proxy=1

A screenshot of the Web admin interface of the locally running Toonel on my Vox:



As can clearly be seen, there was about 80% (fourfold!) bandwidth usage saving during the active session. This alone makes Toonel really worthy if yours is not an unlimited data plan.

A quick visit to WhatIsMyIP also shows it’s through the Toonel server that you’re connected (85.25.148.242 is one of the IP’s of the Toonel servers).

It’s VERY important to remember that, currently (as of 07/10/2007), the SP version of Opera Mobile does NOT reliably support proxy servers. Therefore, if you absolutely must use Toonel (or ANY external proxy server), you MUST use IEM and forget Opera Mobile.

As IEM, as with the PPC version, also depends on the operating-system level proxy settings (unlike other browsers), you must also configure the system to access the Net differently than before. That is, do the following:

1. in IEM, go to Menu / 9 Tools / 3 Options / Connections, untick “Automatically detect settings” and select “Work” in the list as can be seen in HERE
2. in the system-level Settings, go to 6 Connections / 6 Proxy, press Action on New and create a new record as can be seen in THIS screenshot (as can be seen in HERE, just leave “Type” on “HTTP”). You can name the proxy setting anything; in here, I’ve called it ‘t’. That is, all you need to do is setting “The Internet” to “Connects from”, “Work” to “Connects to” and entering “127.0.0.1:8080” in “Proxy (nameort)”.

Note that, after this, you will need to configure your other programs also using the system-level settings to use Toonel instead of a direct connection. Unfortunately, I haven’t managed to configure the built-in Messaging to use the built-in POP3 proxy support of Toonel (as opposed to the Pocket PC Messaging). Also, remember that, should you have the built-in Live (or MSN) Messenger, defining the proxy will also render them useless.

Unfortunately, it seems it’s not possible to make these programs work with a proxy defined in the above way. That is, you will need to delete the proxy every time you want to access your mail. It seems there are no other ways of disabling it - for example, setting the source / target networks to something else doesn’t work.

Again, keep in mind that you can have Toonel activated for IEM (that is, using a system-level proxy setting) AND still access your mail (both compressed, via Toonel, and uncompressed) via other, Smartphone-compliant mailer clients; for example, FlexMail. With the latter, you can safely use the compression offered by Toonel too and the mails downloaded just OK.

1.5.3 Java applets

While the IEM plug-in of the just-released CrEme 4.12 (the only Java Virtual Machine to be compatible with the Smartphone AND have an applet plug-in) can be registered, it doesn’t seem to be working, unlike on the Pocket PC.

Neither the applet-based Radar Weather test nor the local demo applet (Cube) shipped with the system work: the JVM plug-in just keeps showing "loading applet". Example screenshots: 1 2 (Vox); 3 (Oxygen).

[Menneisyys]

1.6 Keyboard shortcuts

I’ve compiled a chart of the three SP Web browsers showing how a given functionality can be accessed. As can be seen, in general, Opera Mini requires the least button presses to do something (assuming IEM and Opera Mobile run in full-screen mode, which also means double initial softkey presses instead of just a single one to access something in menus only – that is, not having a direct dialpad shortcut).

Keep in mind that, if you extensively use the dialpad (for example, to directly enter the number of the menu item you’d like to activate – these numbers are shown in all menus and I also reproduce them here), you can navigate MUCH faster than using the D-pad to scroll up/down a menu.

You can find the chart here - make sure you check it out, you’ll find it REALLY useful!

2. Non-working or not recommended browsers

2.1 Thunderhawk 2.0

Unfortunately, this browser wasn’t updated for WM5. This means neither the SP2003 (1 2) nor the SP2002 version (these are the two versions available for download) can be installed on WM5/WM6 SP models. All in all, forget about it for the time being.

2.2 NetFront 3.4 Technical Preview 008

NetFront is a well-known browser, which, as of the Technical Preview (TP) versions of the forthcoming, 3.4 version, also received (still a bit flaky) Smartphone support. (No, don’t expect version 3.3, the currently avaailable non-preview, commercial version to run on the Smartphone – it can’t be installed).


(a 176*220 screenshot; the same device scrolling through a stock exchange list in Normal (desktop) display (rendering) mode)

(Note that most of these are all non-full screen screenshots. I used them to prove the screenshots have indeed been taken on a Smartphone. In reality, especially on 176*220 devices, you will want to stick to full screen mode to maximize the screen estate available for browsing).

Note that, currently, the last TP version is 008. You will, however, want to prefer the earlier, 007 version (see review HERE) accessible for example HERE because version 008 is far more restrictive and the two versions have the same expiration date.

The main difference between the PPC and the SP version is that you can’t navigate to the address bar of the latter using any keys (or any menu). This means you must use a cursor emulator like SPHelper to click the address bar; that is, to transfer the focus there.

It’s very important that, after you load the program, it’s only the command bar (the two softkeys) that will change, nothing else, as can be seen in HERE. To bring up the standard Netfront GUI (with the address bar), you will need to navigate to Menu / View / Full Screen. It’s then that you will be presented the standard NF GUI and start working / browsing via, say, going to Menu / File / Bookmark (or Operation / 6 Bookmark) or, with SPHelper (or any other cursor emulator), activating the address bar.

Note that while you can’t navigate to the tabs (if you do open more than one tabs) using the D-pad, you can easily access them via Menu / 1 Window for both switching to and closing.

Unfortunately, the restrictions of the PPC version also apply here; most importantly, the inability to redefine keys / buttons to quickly access any kind of functionality. This is especially annoying with the Smartphone version, where you have tons of easily accessible buttons, which are heavily used by all major, highly-recommended Web browsers (Opera Mobile, IEM (particularly after hacking the Registry) and Opera Mini but not jB5 as yet). In here, you can’t even use page scroll using the touchpad. In addition, not even the Smartphone “back” button works (which does work in both Opera Mobile and IEM) to quickly return to the previous page.

Interestingly, while there certainly is Flash support on the Smartphone (example screenshot HERE), YouTube, as opposed to the PPC version, doesn’t work. Remember that you need to activate Flash manually and also remember that it will chew through your battery if you navigate to any Flash-enabled web page – yes, it’s still very weak, battery usage-wise. The Access folks should immediately look into this problem.

All in all, while it’s certainly usable, it’s, on the Smartphone platform, not as convenient (and battery-friendly, for example, Flash-wise) as Opera Mobile or IEM. Only use it if you REALLY want to stick to NetFront and you can put up with the restrictions (not directly accessible address bar, sub-par Flash support etc).

[Menneisyys]

2.3 Webby

Unfortunately, it doesn’t run either. While it can be installed, it refuses to run (1 2 3).

2.4 Minimo 0.2



(the latter is a 176*220 screenshot; as can be seen, only the last, Menu (…) icon is invisible; however, transferring the focus to it will also work. Too bad it turned out to be pretty unreliable on my WM5 AKU3 s310 (Oxygen)– even more so than on my QVGA Vox. For example, it didn’t even finish loading the SPT homepage as can be seen in the above screenshot.)

While it can be installed on SP’s, on this platform it’s far from perfect and, in general, useless, for the following reasons:

1. it has HUGE memory usage (the biggest problem with the 0.2 version on the Pocket PC platform too). After loading, it consumes about 12Mbytes and, when you load additional pages, this decreases even more, leaving little (if any) RAM memory
2. accessing the icons (to, for example, bring up the address bar) at the bottom can only be done using the right softkey. This, on the other hand, first, iterates through ALL the links in the page (yes, ALL of them), and only after this moves down to the bottom icons. A mouse emulator like SPHelper doesn’t help (to directly click the icons at the bottom) – Minimo just doesn’t sense the mouse clicks (that is, left softkey presses)
3. the browser often crashes (mostly if you run out of memory) and is generally slowish

All in all, I don’t recommend it. Also see for example THIS and THIS for more info / user opinions.

Note that the other available version, Minimo 0.16, isn’t installable on Smartphones at all.

UPDATE (later the same day):

1. in THIS thread, MoDaCo forum member holg posted something definitely worth reading - it, for example, explains how you can directly start Opera Mini from the alternative, by me, often-discussed midlet runner environment, the IBM J9. It also shows how external proxies can be used with this environment.
2. SPT frontpage

Cross-posted to: PPCT, SPT, MoDaCo, AximSite, XDA-Developers, BrightHand, FirstLoox, HowardForums.

[Menneisyys]

UPDATE (08/31/2007) : Opera Mini 4 beta 2 out; the FULL review has been posted to these forums: PPCT, AximSite, XDA-Developers - 1, XDA-Developers - 2 FirstLoox, BrightHand, HowardForums, SPT, MoDaCo, Opera Mini forums.

[Menneisyys]

UPDATE (10/20/2007): I've published a review of Opera Mobile 8.65 Final (PPC/SP), Picsel 1.0.5 (PPC/SP) and the brand new Spb Pocket Plus 4.0 (PPC). A new version of jb5 (PPC/SP) has been released and a brand new, albeit very simple IEM add-in Web Viewer for WM5 (PPC). Also, I’ve linked in some of my recent reviews of some new (not very important) Web browsers: TeaShark (PPC/SP) and UCWEB (PPC/SP). Finally, I've published some genuine, never-before-published tips and tricks on utilizing the Pocket PC hardware application buttons to control Opera Mini and Opera Mobile. It's a MUST for any serious Pocket PC user - you'll LOVE my new tips & tricks. See THIS. Cross-posted to: PPCT, AximSite, XDA-Developers - 1, XDA-Developers - 2, FirstLoox, BrightHand, HowardForums, SPT, MoDaCo.

[Infobits]

Nice rundown on browsers but why is Skyfire not covered here? I just loaded it onto my Samsung Jack and it seems to be pretty good (better than IEM).
Would have liked to know how Skyfire compared to Opera and other browsers. fyi