ATT WM6 iGO not working, gx.dll problem?

---

I've upgraded my vodafone to the at&t wm6 and iGO 2006 plus doesn't work correctly, it loads shrunken/compressed in the middle of the screen to the point of (almot) unusable, it worked fine on the wm5.

I think the problem is with the gapi, as when I tried using Morph gear with manual driver and selected gapi the screen was also compressed in the middle, and it too woked fine with gapi on wm5.

I know the GAPI is located at the gx.dll file, I can't delete or rename that file, anyone knows how to maybe put the gx.dll file from wm5 on the wm6?

Hello

I have the same Problem with I-GO and WM6

So i flashed back to WM5 :(

treo 750v, flashback ?

---

I have the same problem with my treo 750v. Moreover also my phone is now locked, whereas initially I could use ith wiht any provider. I know this was nog a smart move by now. Question is how to solve this. Anybody has a clue ?
According to palm it is not possible to flash back to WM5. However I read in previous post they recovered wm5, was this also with palm 750v ?

Hope somebody can help.

how do you perform a rollback to wm5

---

can some help in telling me how to perform a rollback to wm5 on the treo 750v to the 1.16 firmware version.

IGO - Treo 750 - WM6 problem

---

Hi there!

Could you figure out something about the IGO display problem that occurs after WM6 upgrade?

I have beed playing around with the sys.txt file changing settings in the [interface] and [gx] sections. I have also tried to replace the gx.dll GAPI library with the latest one.

No success so far.

Please, let me know if you have any progress on this!

Thanks!

Solution for running iGO on Treo 750 with WM6

---

Please verify if the following solution works:

- Create a file in your iGO folders called sys.txt
- The file should contain the following section:

[interface]
gxoff=1

It already worked for a few Treo users.

Originally Posted by rmplus

Please verify if the following solution works:

- Create a file in your iGO folders called sys.txt
- The file should contain the following section:

[interface]
gxoff=1

It already worked for a few Treo users.

Hi:
I would love to try this. I am somewhat of a newbie though, can you please give further instructions? I of course understood the part about creating new file, from there I got a little lost. Do I create a text document with gxoff=1 as the actual text
in it? Sorry if this is a dumb question

Thanks!

Well, am VERY happy to report, that the excellent advice given by rmplus, worked perfectly after I figured out that I had to include the entire text (I was leaving off the [interface] portion):

[interface]
gxoff=1

in a .txt file called sys.

THANKS SO MUCH

Does anyone happen to know of a fix like this for Jewel Challenge?
I am having the same problem.
Thanks!

after i did this i am getting an error:

C:\GPS_2006R3_iGOSE\firefly\base\core\ffsurface.cp p.299
Exception in EndPaint
exiting application