Please report your GPS experience

---

For the lucky people who got their Kaisers already, would you please report your experience regarding the built-in GPS please specially the initial cold fix as it was very slow with the Trinity P3600

TomTom 6.030 does not work, instead you have to install the TT version 6.0.32 from the accompanying CD. The first fix (after QuickGPS ran) was almost instaneaous and a lot faster than on the Athena.

Agreed; and, at least in Google Maps, the position is more accurate than the Ameo.

For batterie Life

---

Hello,


Can you post hte comment of batterie life when you use the GPS.

For example: the phone
the telephone is load completely (100% full batterie) and when you use 1 hour of gps
how much battery it remains?

Thanks.

Private69.

@++++

Pfff TyTN II has 5 to 7 satellites reception on the dinnertable in the living room where the x7500 does not receive anything. Not bad for a Qualcomm GPS that supposedly is less good as the Sirf III ...

Originally Posted by Wiz

Pfff TyTN II has 5 to 7 satellites reception on the dinnertable in the living room where the x7500 does not receive anything. Not bad for a Qualcomm GPS that supposedly is less good as the Sirf III ...

sorry for a stupid question, do u use tomtom 6 to check the number of satellites? i cant get my gps to start working at all.

Originally Posted by Wiz

TomTom 6.030 does not work, instead you have to install the TT version 6.0.32 from the accompanying CD. The first fix (after QuickGPS ran) was almost instaneaous and a lot faster than on the Athena.

Am running 6.030 now!

Don't ask me how or why but it's working fine.

Joe

I now verified that on TT6.030 you have to use "Other NMEA GPS/4800Bd/Com 4: and on TT6.032 you can stay with "Internal GPS"

In any case, TT6.032 with "Internal GPS" the fix is aqcuired a lot faster than on TT6.030

TT6.032 is supplied with the TyTNN II on the accompanying CDRom

(TT6.032 incidentally does not allow itself to be installed on any other device, the installer prevents that, but after installation on the TyTN II, the directory can be copied to for instance the x7500 to replace the old installation there, and it will work fine. My first impression is that also on the x7500 with TT6.032 the fix is faster, but I still need to run the "dinner table test" )

its working fine now after i installed the version on the cd. thanks. my MapKing chinese version also working, GREAT!

When you use tt6.32 from the CD, can you use any tt6 map? or is it locked to 1 map only?

Can you have multiple maps with the tt6.32 from the CD?