Originally Posted by fluxist

I have figured out how to use Internet Sharing over WiFi, which essentially makes my Hermes an Access Point.

Do the following:
1) Open Settings->Internet Sharing. Enable IS for Bluetooth PAN.
2) Change HKLM\Comm\ConnectionSharing\PrivateInterface to "TIACXWLN1" (for the Hermes). It should currently be "BTPAN1".
3) Open Settings-> Connections -> Wi-Fi. Select Network Adapters tab. Click IEEE 802.11b/g Compatible Wi-Fi.
4) Enter IP address 192.168.1.1 and subnet mask 255.255.255.0. Click OK.
5) Select Wireless tab. Add New.. to add the Network name for your ad-hoc network (I prefer "adhoc")
6) Set the client computer to use the same ad-hoc network. Client will receive an IP address from the device (don't need to manually set the IP).

Hmm what if you have WIFI, but dont' have the IEEE...mention above? On the Samsung Omnia, i think it is different. I dont have TIACXWLN1 adapter, but dont see the intshare.dll for the adapter I have..

psp??

---

Originally Posted by fluxist

I have figured out how to use Internet Sharing over WiFi, which essentially makes my Hermes an Access Point.

Do the following:
1) Open Settings->Internet Sharing. Enable IS for Bluetooth PAN.
2) Change HKLM\Comm\ConnectionSharing\PrivateInterface to "TIACXWLN1" (for the Hermes). It should currently be "BTPAN1".
3) Open Settings-> Connections -> Wi-Fi. Select Network Adapters tab. Click IEEE 802.11b/g Compatible Wi-Fi.
4) Enter IP address 192.168.1.1 and subnet mask 255.255.255.0. Click OK.
5) Select Wireless tab. Add New.. to add the Network name for your ad-hoc network (I prefer "adhoc")
6) Set the client computer to use the same ad-hoc network. Client will receive an IP address from the device (don't need to manually set the IP).

And it works!

Interestingly, while IS was enabled, wifi stayed on and connected when the phone went to standby mode. Normally wifi turns off to save battery during standby. I imagine this will drain your battery in a hot minute, so bring your charger.

UPDATE (28-Oct-2007): Attached are some more beta releases of patched intshare.dll. I've created versions for most of the adapter names people have requested. By renaming this dll to intshare.dll and copying it to \Windows, Internet Sharing will use TIACXWLN1 (or whichever dll you use) when Bluetooth PAN is selected. I.e., if you use this, you will not need to make the registry changes above.

This will handle the registry part, but of course you'll still need to set up the ad-hoc network on your own.

UPDATE (03-Nov-2007): I've attached a beta version of the patched Internet Sharing app. It's in its own cab so it won't overwrite your existing IS. This app replaces Bluetooth PAN with 802.11b/g Wireless Ethernet. No registry hacking required. This app is well suited to replace the MS version on cooked ROMs.

If you use an adapter other than TIACXWLN1 then replace intshare.dll just as before.

UPDATE (08-Nov-2007): Attached is v 0.9.1 of the Internet Sharing Mod. This update addresses the 10 minute disconnect bug most people have experienced.

best,
fluxist

would this work on the psp?? because it dosent work with WMWifiRouter cause that only supports AD_ Hoc but does dis support infrastructure?? like a normal house router?? please respond

idk whats wrong, my phone wont connect to the 3g internet, then just say the remote party has ended this connection.

How do use 1 Ethernet connection for multiple computers? I am trying to turn one Ethernet connection into multiple connections for 5 computers. I know there's a small box thing that I can plug them in to (my uncle had one), but I don't remember what it's called and how to go about getting started with it. Could someone please help, ASAP. I need to know what I need. THANKS!
_____________
matrimonial

noob question

---

Hi, i have been loking arrownd and cannot find the answer.
My Hermes can connect to my 2Wire router through WiFi
I have a desktop PC that has NO WiFi card, and would like to use the WiFi connection my phone has instead of my GPRS for Internet Sharing. Is that possible in any way???

Try this " MNWiFiRouter " No Registry setting needed. Very user friendly!

Better Solution that includes Encryption and Security

---

The hack is nice if you are looking for a free solution but if you don't mind paying for a great program to do the job then I recommend WMWifiRouter It has all the options for sharing plus encryption and security. It also has a trial to see if you like it or need that feature.

Windows Mobile 6.5 help

---

Hello all,

Firstly great advice, much appreciated! However, I upgraded my HTC S710 Vox to Windows Mobile 6.5 using one of the roms on this site - what are the instructions for this version of Windows Mobile to get it working?

1) Open Settings->Internet Sharing. Enable IS for Bluetooth PAN.
Ok.

2) Change HKLM\Comm\ConnectionSharing\PrivateInterface to "TIACXWLN1" (for the Hermes). It should currently be "BTPAN1".
Ok (I found my phone specific string was "TNETW12511").

3) Open Settings-> Connections -> Wi-Fi. Select Network Adapters tab. Click IEEE 802.11b/g Compatible Wi-Fi.
Fail. I have Settings->Connections->WLAN Settings but in here there is no tab for network adapters.

Any help appreciated (maybe I have to go back to Windows Mobile 6.0?)!

Thanks,
Aaron.

Why Searchalligator

---

I notice that after running sharing to my computer that my browses address bar runs a search to Searchalligator.com My computer doesn't do this at all when hooked to any other wifi or ether port. Is this coded into the router? If so how do I turn it off. I figured that XDA wouldn't put spyware into their tools I guess I was wrong.

i am new in this.... but i want to ask is it possible adding a registry file "HKLM\Comm\ConnectionSharing\PrivateInterfaceTIACX WLN1" instead of replacing it with TIACXWLN1??? so that there can be three connectivity option in ICS , sorry for bad english