Country Code +1 (plus one) being dialed for contacts synched from Outlook

---

I have run into a problem which I believe started after I ran the titan_1.40_radio into my XV6800.

MS Outlook places the country code before all the contacts phone numbers and the country code for the US is +1 so at this point all the phone numbers in my contacts have +1 in front of the area code.

I had been synching my contacts between Outlook and my phone before installing this version of the radio and this was not a problem previously. I tried restoring the official VZW ROM today and that did not help, when dialing off the contact list I either get 3 beeps or a recorded message that the call cannot go through. If I dial myself, without a +1, the call goes through just fine. The reason I think it is the radio is because this is the only change I can isolate back to the start of the problem.


This brings me to my question, does anyone know where I can pull the original version of the VZW radio?

Has anyone else noticed this issue?

Ks.

From the Mogul user manual:

3.10 Customizing Plus Code Dialing
You can customize how phone numbers that begin with a plus “+” sign will be dialed.

1. Tap Start > Settings > Personal tab >Phone > Services tab, or tap Menu > Options on the Phone screen and then tap the Services tab.

2. Select Plus Code Dialing, and then tap Get Settings.

3. To place local and international calls from the United States, select Enable under North American dialing.

When you place calls, the “+” sign at the beginning of phone numbers that you dial will be replaced as follows:

 When you enter a long distance phone number that starts with “+1”, the “+” will be removed and the rest of the number will be dialed. For example, if you entered +1 416 123 4567, the number to be dialed will be 14161234567.

 When you enter an international phone number that starts with a “+” followed by a digit other than 1, the “+” will be replaced with the United States international dialing code, which is already set by default. For example, if you entered +58 212 123 4567, the number to be dialed will be 011582121234567.

Tip:
If you modified the international dialing code, you can tap Reset to change it back to the default.

Thanks for the feedback and this is begining to identify the source of the problem and helped resolve it.

I went to Start > Settings > Personal tab >Phone > Services tab and there is no Select Plus Code Dialing option.

Are the services listed here part of the radio? I would not think they are but without flashing back to the stock VZW ROM I can not be sure.

I searched my registry for plus and found a few entries that appear to be related to this in:
HKLM\Software\OEM\PhoneSetting\PlusCodeDialing

I have only the following three (along with (default) of course), they are:
PlusCodeEnable = 0
PlusCodeNumber = +
ResetNumber = +

Would you be willing to check your settings for these and post them here along with the the setting defined in your Start > Settings > Personal tab >Phone > Services tab > Select Plus Code Dialing settings?

I am curious if there are perhaps registry entries I am missing at this point.

I have changed the PlusCodeEnable from 0 to 1 and this has taken care of my problem for now. I will keep my eye on it as I build other ROMs and try to identify where it comes in from and how it comes in with the stock VZW ROM. I will most likely add it to the list of additional registry entries I include in ROMs as well.

I am still curious about how this is working for others out there cooking ROMS with DCD's kitchen.

Thanks,
Ks.

HKLM\Software\OEM\PhoneSetting
HiddenPlusCodeDialingPage=0

HKLM\Software\OEM\PhoneSetting\PlusCodeDialing
PlusCodeEnable=1
PlusCodeNumber=011
ResetNumber=011

I am running Energy ROM on my HTC Imagio. I store all my contact numbers using the plus code since I have numbers of people residing in different countries and have the same issue.

I have made the above changes and am able to dial numbers starting with the plus code, from the U.S. What do I have to change to dial when I am in, say, India? India's country code is 91 and the calling rules are a little more complicated than in the U.S. When calling international numbers, the + has to be replaced by 00. When calling long distance in India, the +91 has to be replaced with 0. I assume the rules must be different for other countries in Asia and Europe as well.

I was able to access an "Assisted Dialing" menu in the phone menu on the stock ROM but this menu does not exist in the modified ROM. Is it possible to add the Assisted Dialing option to modified ROMs? If so, that might be all I need. I would like to make sure I can dial using my contact list before traveling outside the U.S.

Thanks!

Can anyone tell me the registry setting to get plus code dialing to work for text messages too? I have edited my registry as mentioned here and it works fine for making phone calls. However, if I send a text to a country outside the U.S. using the plus coded phone number, it does not go out. If I replace + with 011, it works. I am able to send text messages to a plus coded number in the U.S. though.

Hope someone can help. It is a pain having to enter the whole number starting with 011-countrycode manually instead of using the plus coded number from the contact list. Thanks!