Polaris 3650 Fully DEAD after MTTY task 2a
this is my first post, and i 've a bad experience to tell u
I execute the bad command task 2a on MTTY and i brick my poor polaris...
this is the output on mtty:
Fill RSVD information for block 288 to 309
Storage start sector=0xD780, total sector=0xDB40
Storage start block=883, total block=877
Total Bad Block in CE: 1
Erase physical block from 1174 to 2032
si backup: Erase physical block from 2032 to 2048
Format ALL start
backup SPL OK
backup MISC configuration OK
SPL start start block=288, total block of CE=1760
ERASE block 878 FAIL !!!
Write 0xFF start page=0x4800, total page=0x1B800
SPL version and MFG TAG are same, skip it.
restore SPL OK
restore MISC configuratoin OK
restore MFG configuratoin OK
Format ALL end
--- 2K bytes sector version ---
DEVICE MAKER ID=0xEC
TOTAL PAGE SIZE=0x840
Checking block information
BLOCK 878 (0x36E) is bad block
OS NOT FOUND !!!
and finally i found my phone dead, when i press the power button nothing happen i have always blank screen, i try with any possible solution, hard-reset (i can't put in bootloader mode), FrankenKaiser tool but my phone accept only command setboot and nothing else.... (always invalid command)
Is there any working method to unbrick?
Can htc service resolve my dreadful issue??
Thanks to everybody