Help! Phone Freezes At Sprint Splashcreen

---

HELP PLEASE

I tried to do DCD's upgrade method to get me GPS and what not, and I got stuck at #3

1. Copy down your infromation from PST (more below)
2. Update your Hard-SPL to 2.40-olipro
3. Flash new ROM
4. Flash new Radio
5. Reprogram PST settings from earlier if necessary.

THEN when it was restarting it froze at the sprint splash. so i reset, and still it froze. I tried doing a hard reset and I tried the power+camera+reset combo with the stylus in

ahhhhh! please please any help is appreciated

TIA

Power+Camera then SoftReset, Just press the reset button while the power and camera are both pressed down and let them go and then the boot loader should show up

ahghhh! okay i did that and got the lovely bootloader

i hate to be retarded sounding but what next?

THANKS for your help its greatly appreciated!

OKay i tried to continue but now it says NO RADIO under the sprint logo! ahh its getting worse?

edit: of course now i can still get into the bootloader though, so what to dooo

if its of any help the bootloader says:

TITA100 MFG
SPL-2.40 Olipro
CPLD 9

u said u loaded the radio in there right, well if so go head and load the dcd rom in there now, if u dont have either go do the radio, then it will restart then freezes again if that happens do the power, camera and reset button thing and load the dcd rom then after that it will load fine

No radio means no radio. Install the full blown 3.16 to get it all, then install DCD's rom if you want.

heres a small idea. it might just work.

READ

this question has been asked a million times. geez people. if you are not willing to read and do general troubleshooting wtf are you flashing roms for?!

cluttering forums..

for the record. i want world peace as much as the next guy, but not as much as i would like to have a forum community of people who read and thought for themselves. unfortunately...much like the real world..you can idiot proof a forum

Load the image on a Fat 32 sd card, name TITAIMG and soft reset to BL, It works every time.

Originally Posted by watson540

heres a small idea. it might just work.

READ

this question has been asked a million times. geez people. if you are not willing to read and do general troubleshooting wtf are you flashing roms for?!

cluttering forums..

for the record. i want world peace as much as the next guy, but not as much as i would like to have a forum community of people who read and thought for themselves. unfortunately...much like the real world..you can idiot proof a forum

Don't be an effing jerk... Posts like are a waste of space* and should be considered "clutter"

At any rate... I myself had this same issue so I just tell you what I did. As you have already done, when it freezes on the splash screen, enter the bootloader. I had an issue where my pc didnt recognize my device anymore, but I was able to find an app (here on xda) that stopped Activesync. Once I did that I was able to flash a diffrent rom and start over (I used dcd's 1.6.10 Sprint)

When starting over go very slow making sure not to overlook any step. Start with http://forum.ppcgeeks.com/showthread.php?t=16806 flash it
Then flash dcd's 2.0 beta.

I'm going to be honest, between being stuck in bootloader, frozen splash screen, reading an ungodly amount of useless posts* and listening to my girlfriend tell me to "Marry the effin phone" the whole thing took me about 10 hours. So if this helps great, let me know

Load radio and os rom from micro sd!

---

Ok, for all sprint users that are stuck because you loaded a cooked rom without loading the correct radio first. Or you have some how overwritten the radio rom, dont ask me how I did it but i did.

Here it the fix!

I was running the 2.40 Olipro boot loader when I preformed these steps. I do not know if they will work with other boot loaders.

download the Official 3.25 rom from HTC. ftp://Mogulrom:sprinttitan@files164....CS_AM_Ship.exe

Use winrar to unpackages it.

Format a microsd card as FAT32.

Copy Special_4350.nbh, and RUU_signed.nbh from the unpackaged 3.25 rom to the freshly FAT32 formated microsd. Rename "Special_4350.nbh" to "TITA100.nhb. Rename "RUU_signed.nbh" to "TITAIMG.nbh". Inset the microsd. Put device in bootloader mode, press and hold both power, and camera then softreset while holding the buttons. Follow on screen instruction from boot loader mode.

Hope this helps...