Introducing XDA:DevCon – A Conference For Developers By Developers
XDA Developers Android and Mobile Development Forum
Forgot your password?
 
Post Reply+
Tip us?
 
sinnnger
Old
#1  
Junior Member - OP
Thanks Meter 0
Posts: 3
Join Date: Jun 2007
Default Very Strange Brick Problem

Hi guys, I've read and used the forum for years and upgraded my Cingular 8525 a ton without troubles (followed Vanx's method for vista and for upgrading), but this is the first time I'm really stuck without a clue.

I had Schaps latest OS on my phone working fine for about three days. It was charging with the USB hook up to my Computer. I pulled the USB out and the phone entered bootloader. I couldn't get it out. I tried using mtty to no avail, hard reset ect., but finally used the SD loading method to put TNT's latest on it (don't know why this worked). Here's the thing though, the phone will load fine on first load after I flash, but if I soft reset or turn the phone off and on it goes right into bootloader mode. The only way I can get it to load up again is to connect it to the computer's USB, take out the battery and then put it back in. the OS then boots up without fail.

I have read a ton and searched on the forum, and if any of you can help me understand what the hell I can do to fix my phone I would really appreciate it. I will post anymore info you guys would like, I really need your help on this one.

Thank you so much!
 
dmj1973
Old
#2  
Member
Thanks Meter 0
Posts: 87
Join Date: May 2007
Location: Portsmouth (ish), UK
Hi,

I posted exactly the same problem today ! here:

http://forum.xda-developers.com/showthread.php?t=381284

It's really strange !

Dave
 
sinnnger
Old
#3  
Junior Member - OP
Thanks Meter 0
Posts: 3
Join Date: Jun 2007
I've been reading everything and it appears that Schaps's new version seems to have this problem sometimes....I have the exact same problem as everyone else (mtty gives me the same results), and flashing a new rom doesn't get rid of it....I hope there is some way to fix this!

maybe I'll try flashing a new radio and see if that helps things....
 
dmj1973
Old
#4  
Member
Thanks Meter 0
Posts: 87
Join Date: May 2007
Location: Portsmouth (ish), UK
I did notice that flashing Schaps 4.31 seems to include radio 1.50 and I had changed my anyway to 1.43 as I thought that was better for my area.

Not sure a radio will help. Maybe a different ROM version will ? Maybe 3.54 ?
 
sinnnger
Old
#5  
Junior Member - OP
Thanks Meter 0
Posts: 3
Join Date: Jun 2007
I have flashed TNT's rom as well and it still has the problem now....I'm flashing a new radio as I type, I'm going to have to reflash the OS too, it just got stuck again as it was restarting.
 
dmj1973
Old
#6  
Member
Thanks Meter 0
Posts: 87
Join Date: May 2007
Location: Portsmouth (ish), UK
Just a quick thing, I think I have solved my problem (not sure if it is permanent) by powering the phone off and on. Not resetting, just a simple power off. I spoke to a colleague who said the way it shuts down is different to soft reset (makes sense) and I haven't powered my phone off properly for a long time.

I have tried soft reset a couple of times since doing this and it hasn't gone to the bootloader screen once.

Maybe this is the simple fix.

I will keep you posted.
 
ermenzegna
Old
#7  
ermenzegna's Avatar
Senior Member
Thanks Meter 0
Posts: 248
Join Date: Oct 2007
Location: Jakarta
try to flash OFFICIAL ROM first , maybe there are few bug / missing file when error appear while flashing other ROM.
I hope it will help you both.


rgds,

ermen
YES ! it's a TouchPro

ROM : NGR 3.0
HardSPL : Olinex 1.90
NOT SECURITY UNLOCK yet, cause my money run out with this beauty beast

 
ultramag69
Old
#8  
ultramag69's Avatar
Senior Member
Thanks Meter 239
Posts: 3,329
Join Date: Nov 2007
Location: Waratah
Use mtty to see if yo have any bad blocks... I've had a few problems the same as yours and found I had 1 or 2 extra bad blocks, after the 2 "factory standard" bad blocks I got on my jasjam of course. hope this helps...
 
dmj1973
Old
#9  
Member
Thanks Meter 0
Posts: 87
Join Date: May 2007
Location: Portsmouth (ish), UK
My fix didn't work.

Not sure what I am suppossed to see when I run "task 2a".

Has anyone had any luck fixing this ?

 
Post Reply+
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Go to top of page...

XDA PORTAL POSTS

Xposed Framework Module for the AT&T Galaxy S 4

Got yourself a brand new Galaxy S 4? Are you looking for some fun mods to make it truly your … more

Job Interview Prep: Phone Screen Part 1 – XDA Developer TV

XDA Developer TV Producer Jayce has been very busy creating videos to help … more

Auto Test Your Android Apps with Robotium

You’ve just finished coding your very first app, but before you release it to the wild, you … more

Open Source CPU Info App for Windows

So you’re playing with your shiny new Windows 8 tablet PC, when one of your like-minded geeky … more