Please HELP. SPL 1.09 and stuck

---

hi guys,

i was excited about the new Radio upgrade, so i tried to flash it. i got an error, because my SPL is 2.05. so i tried to unlock the phone using jerpelea's guide, flash to 1.09 -->success, then WWE (1.10) but an error occured saying invalid vendor ID during WWE flash. now i have SPL 1.09 on my phone and my phone is stuck on the 2nd boot screen of jerpelea's WM6.1 beta 4 ROM. my phone is fully unlocked using jerpelea's unlock guide, that's how i got to install SPL 1.09 successfully. how can i recover my phone? please help.

Update 1: i tried to flash back the original dopod 595 WM5 ROM. i mixed the RUU updater from the latest official ROM with the nbh from dopod WM5 ROM. the flashing works. when it's 100%, the phone reboots and, i got back to the same problem. stuck at 2nd/3rd boot screen. i now have IPL-0.90 and SPL 1.09 on my phone. Please help me to recover my phone. i've tried to hard SPL shown in the wiki guide, doesnt work. says invalid vendor ID crap. i really dont know what to do now.

Update 2: when the device boots, it stucks on the 2nd/3rd boot screen and if the USB cable is attached, for a brief moment, windows can detect the phone and i can even browse the content of the phone from my PC. but after that, the device disconnects itself and just remain stuck at the 2nd/3rd boot screen. the device appears to be totally freezed/hang. even the LED charging indicator will not turn off when i unplug the device from computer

i believe what i need to do now is to make a nbh image that is signed to i dont get any corrupted image message when trying to flash. i used HTC ROM editor to mix and match the SPL and IPL file so that i can downgrade the SPL to 2.05 and upgrade it again later. but i dont know how to sign nbh files.

If i were you I'd use this one =)

Originally Posted by futureshock

ok i found it i didn't read further the 1st page on sspl thread


edit:

have repacked it with runme.bat and 77.7er SSPL ...

Radio_Only_1.54.30.10

At least I did and it worked =)

and then I'll highly recommend this WIM6.1 release by FutureShock: http://forum.xda-developers.com/show...56#post2094056

GL =)

I've GOT IT!!! using various mix and match method, im flashing the phone now!!! fingers crossed it'll boot later

UPDATE: DOESNT WORK! PLEASE HELP

It sure will.. Even I got it to work really fine

crap!. doesnt work. it's still SPL 1.09 and stuck at 2nd boot screen.

is there a ROM editor that works for meteor? can someone please suggest one that can be used to sign the nbh file.

jerpelea, or futureshock, please help

not good news

---

I think I know what do you mean. My device was in very same state like yours few mnonths ago.

Try to run mtty and the command "info 2" without quotes.
Do not forget to disable USB on activesync settings before running mtty.

You will get an answer which includes the CID of your device.
If not (this was my case), you have to send it to the repair center probably.

My device CID was Qtek_A07 (RUS) and I have tried to instal the first official WWE 1.34 ROM update (combined from SPL.nbh and ROM.nbh) and it replaced only the SPL, and the ROM update crashed.
There was not way out so I sent it to the repair center.

The WWE images are expecting the device with CID Qtek_Z12.

Originally Posted by PiGeonCZ

I think I know what do you mean. My device was in very same state like yours few mnonths ago.

Try to run mtty and the command "info 2" without quotes.
Do not forget to disable USB on activesync settings before running mtty.

You will get an answer which includes the CID of your device.
If not (this was my case), you have to send it to the repair center probably.

My device CID was Qtek_A07 (RUS) and I have tried to instal the first official WWE 1.34 ROM update (combined from SPL.nbh and ROM.nbh) and it replaced only the SPL, and the ROM update crashed.
There was not way out so I sent it to the repair center.

The WWE images are expecting the device with CID Qtek_Z12.

this is what i get with mtty

Cmd>info 2
CID: Wait interpreter timeout
HTCSF kEØ(HTCE

what's the meaning of this? is there any hope?

i ran the format command anyway. device reboots and still stuck at the windows mobile logo screen. what should i do next?

Originally Posted by alexnvidia

this is what i get with mtty

Cmd>info 2
CID: Wait interpreter timeout
HTCSF kEØ(HTCE

what's the meaning of this? is there any hope?

i ran the format command anyway. device reboots and still stuck at the windows mobile logo screen. what should i do next?

why did you format ?
try to reflash 1.09 spl
and after this wwe one of 1.34 roms to get 1.10 spl

If you bothered to read the Wiki, you would have seen this:

http://wiki.xda-developers.com/index...blems#problem5

If you can't bother to read the wiki, don't play with roms!

Actually, I did read that, and a couple of problems:

1) Boot Loader is 1.09

2) OS won't load, so can't use any of the ActiveSync-based methods for downgrading to an older version, such as 1.04.

3) CID appears to be corrupted, as per the earlier output pasted.


from other forum ...... so read wiki
http://wiki.xda-developers.com/index...PB_KITL_HERMES

but i dont know if you have the knowledge

Originally Posted by jerpelea

If you bothered to read the Wiki, you would have seen this:

http://wiki.xda-developers.com/index...blems#problem5

If you can't bother to read the wiki, don't play with roms!

Actually, I did read that, and a couple of problems:

1) Boot Loader is 1.09

2) OS won't load, so can't use any of the ActiveSync-based methods for downgrading to an older version, such as 1.04.

3) CID appears to be corrupted, as per the earlier output pasted.


from other forum ...... so read wiki
http://wiki.xda-developers.com/index...PB_KITL_HERMES

jerpelea: First of all I will say thank you for taking all that time you do spend on the ROM cooking/building/making/what-ever-is-the-right-name and I/we really appreciate it!

Originally Posted by jerpelea

but i dont know if you have the knowledge

I think that comment was really unnecessary!
As a n00b I know how hard it is to understand what’s happening. I did read the wiki’s and still I didn’t get HOW TO upgrade a ROM until I found a great post in FutureShock’s thread

Originally Posted by darkDirk

First of all:
It's fantastic what you are doing with wm6.1 and the Breeze, Futureshock !

I am new and trying to upgrade it myself, but at first I didn't have any luck.

Here is a simple newby step-by-step manual:

- Download and extract a MTeoR-FutureShock-WM61-xxxx.x.rar
- Check your Mteor battery in more then 50 % full
- connect the Mteor to the computer via usb and check if Activesync works
- go with DOS (cmd line) to the directory and start runme.bat
- On the Mteor press camera and powerbutton at the same time.
- then immediately press any key on the computer to continue the batch script.
- now you should see the 3-color bootscreen
- press any key to start the rom-update program and follow its directions.
When the update is finished (in less then 5 minutes), then wait untill the first boot is complete.

If you don't get the 3-color bootscreen or you the update on the Mteor stays on 0 % and the rom-updater displays an error, try testing this:
On the Mteor start the explorer and in the root directory (press UP once) find SSPL.EXE en start it.
If the Mteor won't start the program and there is an error like "insufficient trustlevel".
You need to remove the application lock on your Mteor.
Run SDA_ApplicationUnlock.exe on your PC with Activesync working and then install SP_AllowCertificateInstall.cab on the Mteor.
You will find those two in the .rar in ".\opt Software\Unlock Tools"
Then redo from the start.

Then, Have fun !! (Futureshock & DarkDirk)
P.S. works on a BREE100 with IPL-0.90 and SPL-2.05.

But I still do not know what SSPL, SPL, IPL or whatever there is does to me or/and the phone.

Anyway. Thanks for all the work.