WM6.1 Rom for Treo 700wx - Finally!

[NightRaven]

WM6.1 Rom for Treo 700wx

Alltel/Bell/Telus - Release 1.3 Build 20931

Verizon - Release 1.3 Build 20931

Sprint - Release 1.3 Build 20931

• CE OS 5.2.20931 (Build 20931.1.5.0)
• Release 1.2 with the following changes
• Updated XIP to 20931. Build numbers now match.

Alltel/Bell/Telus - Release 1.2 Build 20931

Verizon - Release 1.2 Build 20931

Sprint - Release 1.2 Build 20931

• CE OS 5.2.20924 (Build 20931.1.5.0)
• Release 1.1 with the following changes
• Added Internet Explorer Mobile 6, and Adobe FlashLite 3.0 for full web browsing.
• Change PagePool size from 4Mb to 8Mb to better support IEMO6.

Alltel/Bell/Telus - Release 1.1 Build 20931

Verizon - Release 1.1 Build 20931

Sprint - Release 1.1 Build 20931

• CE OS 5.2.20924 (Build 20931.1.5.0)
• Release 1.0 with the following changes
• Change PagePool size from 2Mb to 4Mb. Dramatically improved speed. Special thanks to SnoopDawg and snake334 for spotting and coming up with a solution to this problem!

Alltel/Bell/Telus - Release 1.0 Build 20931

Verizon - Release 1.0 Build 20931

Sprint - Release 1.0 Build 20931

• CE OS 5.2.20924 (Build 20931.1.5.0)
• Final Release
• RC3 with the following changes
• Fixed missing cleartype tab in settings/screen
• Voicemail speed dial can be edited and deleted.
• Added standard performance tweaks.

WM6.0 Rom for Treo 700wx

Alltel WM6 Rom - (This rom has been updated to include the Alltel OEM.)

Verizon WM6 Rom (Verizon 1.24)

Original WM5 OEM - ROMs

Alltel - WM5 OEM (Stock) ROM

Kitchens

NightRaven's Treo 700wx WM6.1 Kitchen
Download the OEM package for your carrier. Extract it, and place the OEM folder in the kitchen

• Alltel/Bell/Telus OEM
• Verizon OEM
• Sprint OEM

NightRaven's Treo 700wx WM6 Kitchen

Instructions for updating ROM

1. Format SD Card as FAT32.
2. Copy Rom image (NapaBoth.nb0) to SD card.
3. Remove Battery from phone, and unplug the power cord.
4. Reinsert battery while holding the up volume button on the side of the phone.
5. Follow on screen prompts.
6. Once the update starts, plug in your power cord. You don't want the battery to go dead while updating.
7. Wait for approximately 20 minutes for the update to complete.

Misc. Applications

• Palm Threaded SMS
  (NOTE: This install removes the default text messaging notification in order to prevent duplicate notifications.)
  • Phone Service 2.0 (Fixes out of memory error.)
  • Restore Original Text Message Notification (After uninstalling Palm Threaded SMS. You will probably never need this.)
• Windows Live Mobile with Messenger

[sracercelica]

What is it that you need help with? I have a 700wx and would love wm6.1, however, what would be the advantage of flashing to 6.1? and is there an unlocker available for the 700wx?

[NightRaven]

Originally Posted by sracercelica What is it that you need help with? I have a 700wx and would love wm6.1, however, what would be the advantage of flashing to 6.1? and is there an unlocker available for the 700wx?

I'm very new to all of this, so I'm not really sure what the unlocker would be for. There is a way to load custom roms. It's extremely easy. I would like to get the 6.1 rom I have for the 750 on the 700wx, because I want the threaded sms embedded in the rom, and I would also like to get EVDO working correctly. I believe EDVO is not working correctly because of the verizon update. At the very least, I need a way to get it out of the current wm6 rom.

I have been able to add and remove files from the wm6 rom for the 700wx, but I am unable to dump it without errors. I have tried removing all of the files in the rom, and adding the files from the 750 6.1 rom. The rom will flash fine, but then 700wx sits at the bootloader. When I run nbinfo on the 750 rom it shows that it has a boot sector, but the wm6 rom for the 700wx does not.

Like I said, I'm very new to this. My progress so far has been trial and error.

[asbestos]

Originally Posted by NightRaven I am currently trying to create a WM6.1 rom for the Treo 700wx. I have a working WM6 rom running now. However, there is an issue with EVDO not reconnecting after a disconnect. You have to soft reset the device for it to connect again. It will then run fine until EVDO times out, or you loose signal. I know verizon bastardized there EVDO implementation, and had to release a patch to correct there EVDO issue. I believe this patch was added to this rom, and is causing problems if you are running on another carrier. I'm running on alltel. I am hoping an unbranded 6.1 rom will correct the issue. However, I am having trouble getting the 6.1 rom to boot after it has been flashed. I will give the 6.0 rom for the Treo 700wx to anyone willing to help. It runs much better than the stock rom.

Would a dumped 750 treo 6.1 ROM help? I have not started messing my with 700wx yet but I do have a 750 and I can throw 6.1 on it fast.

[NightRaven]

Originally Posted by asbestos Would a dumped 750 treo 6.1 ROM help? I have not started messing my with 700wx yet but I do have a 750 and I can throw 6.1 on it fast.

I have a 6.1 rom and I'm able to get it to dump. I just can't figure out how to get it ported over to the 700wx.

[sracercelica]

Before you can flash custom roms to a phone you need to be able to unlock it. Thats why I asked if there was an unlocker for the 700wx, as far as I know there isnt one. I have been searching for one and havent found one as of yet.

[NightRaven]

Originally Posted by sracercelica Before you can flash custom roms to a phone you need to be able to unlock it. Thats why I asked if there was an unlocker for the 700wx, as far as I know there isnt one. I have been searching for one and havent found one as of yet.

The link in my first post is a custom wm6 rom. I was able to successfully flash it to my 700wx. It runs well with the exception of the intermittent evdo issue. All I had to do to flash it, was format my sd card as fat32. Copy the file to the sd card. Take the battery out of the phone. Reinsert the battery while holding the up volume key. The phone displays press up to update rom. Press up on the direction control. The phone will display checking sd card. Then it will show a screen with a progress bar that says downloading rm + bl or something to that effect. After the progress bar hit 100% the phone reboots, and you are running wm6. I never had to unlock my phone. I have confirmed that it works for Alltel, Sprint, Verizon, and Bell 700wx's. I would be really suprised if it didn't work for all of them.

[Ebag333]

NightRaven:

Interesting stuff. I'm going to have to DL it and take a look.

Couple of questions.

What AKU is this?
Does this have the Palm branded tweaks (IE: threaded messaging)?
Does this have SDHC support?
Where'd you get this ROM? (I suspect I know from where...or maybe I should say from who... )

You might also want to check out what we're doing over on TreoCentral. We have a WM6 ROM that seems to be working okay. I haven't used it a lot as I personally prefer the speed of WM5, but I'll probably start playing with it more at some point.

http://discussion.treocentral.com/sh...d.php?t=164457

[zali]

NightRaven:

thanks so much for this Rom it works just fine on my Sprint Treo700wx.
the only problem is it always says "digital roaming".. how can i change it to sprint?

zali

[NightRaven]

Originally Posted by zali NightRaven: thanks so much for this Rom it works just fine on my Sprint Treo700wx. the only problem is it always says "digital roaming".. how can i change it to sprint? zali

Not really sure. Does Sprint have the *228 option to activate a phone or update the PRL? That might help... You could also try one of the other options in Settings/Phone/Services tab/network.