[SSPL & USPL] Flash any ROM to your Pharos

---

This is a SSPL for use with esteve & pof's JumpSPL along with the HardSPL. It enables you to flash any ROM to your Pharos.

If you wanted to permanently unlock your device, the HardSPL was also available.



JumpSPL & HardSPL Instructions:

1. Transfer the extracted files (JumpSPL.exe & Pharos_JumpSPL.nb) to your device and execute.
2. Use 0x10000000 as Jump Address.
3. After getting the Open File Dialog, press [Camera] & [Power] like you are going to enter Boot Loader, then tab on the Pharos_JumpSPL.nb file (Pharos_JumpSPL.nb).
   
   You will get the grey background screen, you can flash any ROM to your device at this point.
   
   In some case, you may need to unplug and then plug the USB cable again.
4. If you wanted to permanently unlock your device, why not, simply flash it with the HardSPL once and you are done.
   
   After HardSPL, you will notice your SPL version change when boot;
   
   From SPL 1.11.0001
   To SPL 1.11Mobiz

Recommended:

• To make it easier, I recommend changing Button 3 (Camera) to <None> or the Camera may disturb you.

Download: Pharos_JumpSPL Rapid Share (165KB)

Download: Pharos_HardSPL 1.11 Rapid Share (672KB)

Thank you to esteve & pof for the JumpSPL.
Thank you to Mr. Ru Chonburi who create the Pharos_JumpSPL.nb.

I am just the tester and author of this article, all work was done by Mr. Ru Chonburi of PDA Mobiz (http://www.pdamobiz.com).

Enjoy flashing ...

Great!!

Thank you

Great news,
Thanks to mr Ru Chonburi! (and to you too suracha)
so would it be possible to make a radio version that has wifi enabled (like they tried on the niki) that would be awesome!!

GREAT!
Thank you, guys!



Hard-SPL not work
[ERROR]Image File Corrupdet after flashing

Strange

---

Originally Posted by Syrop

GREAT!
Thank you, guys!



Hard-SPL not work
[ERROR]Image File Corrupdet after flashing

It does work for me.

Were you in JumpSPL flashing (grey background page) when flashed the HardSPL to device? Sounds like you try to flash the HardSPL without running JumpSPL.

[SSPL & USPL] Flash any ROM to your Pharos

---

it does not work for me give me more instructions please!!

Grey screen

---

Have you seen the grey screen as result of running JumpSPL yet?

thankyou so much for the info...but it is not working for me as well as i am bit new for all this can you explain me in detail...and ya i got the grey screen as well but as i tried to flash the rom it says error and ends up.......please help me?

Re:

---

artoner974,brainoff

What is your spl version?

Originally Posted by avathar behemoth

Great news,
Thanks to mr Ru Chonburi! (and to you too suracha)
so would it be possible to make a radio version that has wifi enabled (like they tried on the niki) that would be awesome!!

I Quote!!!