problem when you update

---

hp in 6515 had the bootloader mode and not getting to leave here until he managed to resurrect but I lack the file and radio Radio OS file system, then I tried to update the Rom poking the same as had, to see if the 1.29 asi I take what I needed, but when I put in to upgrade the 0.1% and disconnects the ActiveSync, returns to 0.0% and a ratito I get error 606: limited time spent in communication with the bootloader usb, I have tried a lot of times and always with equal and different versions of ActiveSync.
If someone can give me a solution or at least as I can tell you put your radio and radio file system.
There be any other program other than the Pda ActiveSync to communicate with your computer?

Originally Posted by ricar

hp in 6515 had the bootloader mode and not getting to leave here until he managed to resurrect but I lack the file and radio Radio OS file system, then I tried to update the Rom poking the same as had, to see if the 1.29 asi I take what I needed, but when I put in to upgrade the 0.1% and disconnects the ActiveSync, returns to 0.0% and a ratito I get error 606: limited time spent in communication with the bootloader usb, I have tried a lot of times and always with equal and different versions of ActiveSync.
If someone can give me a solution or at least as I can tell you put your radio and radio file system.
There be any other program other than the Pda ActiveSync to communicate with your computer?

one solution is also posted in this forum here i'm just copying and pasting for you because that is posted for another model but i confirm i checked it with HP iPAQ in boot loader by formatting it after flashing bad ROM or any communcation error.

1. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete)
kill two processes rapimgr.exe and wcescomm.exe

2. put your device into the cradle

3. Run mtty and Choose WCEUSBSH001 in 'PORT' (if it doesn't show then you didn't stop all active sync processes above!)

4. type "set 14 0" without the quotes to tell bootloader to boot the OS after reset.
5. type "task 8" to get your device formatted

6. type "task 0" to ask your device reboot

7. take the device out of the cradle, and manually reset it if it does not do that already.





Take Care
ENJOY

but not so you retrieve the radio os and radio system file

solution works on a 6515d with BL screen