NO MORE PTT, BUTTON REMAPPED :) o

---

CONFIRMED, this is how to keep that annoying PTT message from coming up on American Touch Pro's (Fuze maybe? whatever).

Keep in mind, you can't individually map this button with this method, that may come later.

Step 1: Registry editor, remove HKLM/Services/PTT
Step 2: Create a key in HKLM/Software/Microsoft/Shell/Keys called "40C2"
Step 3: Create a string within that key, titled Name with the value being "Button 6" or whatever
Step 4: Soft reset.

From this point on you can remove 40C2, but your PTT button will simply perform with a press what your send button performs with a hold (which can be remapped easily... Settings/Buttons/Button1(Hold)).

NOTE: This apparently doesn't work on all Fuzes, trying to work that out now. It worked with my pre-release, but I'll update this post if a better way is found. Apparently on at least 1 Fuze it only DISABLES the PTT button.

Bump, a few people have asked about this, so bring it up to the top.

Originally Posted by Black93300ZX

Bump, a few people have asked about this, so bring it up to the top.

any chance someone can make this a cab

edit: and there is a standard option to give the send button a hold program? nice

Originally Posted by lbhocky19

any chance someone can make this a cab

edit: and there is a standard option to give the send button a hold program? nice

I don't have means to create a cab, nor do I still have the phone, so I couldn't help ya... It's really not difficult though, if you want just grab a registry editor like PHM and do those quick steps. Another note, I think you have to hard reset to get PTT functionality back. Or maybe replacing the PTT part of the registry will make it work again, not sure. I know soft resets and removing the 40C2 will not change it back to working PTT.

Originally Posted by Black93300ZX

CONFIRMED, this is how to keep that annoying PTT message from coming up on American Touch Pro's (Fuze maybe? whatever).

Keep in mind, you can't individually map this button with this method, that may come later.

Step 1: Registry editor, remove HKLM/Services/PTT
Step 2: Create a key in HKLM/Software/Microsoft/Shell/Keys called "40C2"
Step 3: Create a string within that key, titled Name with the value being "Button 6" or whatever
Step 4: Soft reset.

From this point on you can remove 40C2, but your PTT button will simply perform with a press what your send button performs with a hold (which can be remapped easily... Settings/Buttons/Button1(Hold)).

FWIW, this does not remap the PTT button my Fuze. It disables it - which is definitely a plus because I can't stand the annoying PTT message that came up when I accidentally pressed the button - but it doesn't remap it to the same functionality that the Button 1 (Hold) has.

Originally Posted by ITNV

FWIW, this does not remap the PTT button my Fuze. It disables it - which is definitely a plus because I can't stand the annoying PTT message that came up when I accidentally pressed the button - but it doesn't remap it to the same functionality that the Button 1 (Hold) has.

Well, that's good to know... Perhaps the pre-release was different? Check if you can add another button to your available mappable buttons. Instead of deleting it leave the reg key there, then go to settings>map buttons or wherever it was. Is there a Button 6 there now?

Originally Posted by Black93300ZX

Well, that's good to know... Perhaps the pre-release was different? Check if you can add another button to your available mappable buttons. Instead of deleting it leave the reg key there, then go to settings>map buttons or wherever it was. Is there a Button 6 there now?

It shows up as available to map but if you map it to anything, it doesn't work. I tried press and I tried press-and-hold and I tried every registry key from 40C0 through 40CF. I have a feeling the TF3D is somehow managing the keypress actions but I'm not sure how. Hopefully once the Fuze is in full release someone can figure it out!

My fuze doesn't have button remap option

---

I think I've got an official release, and when I go to settings-buttons all I get is button 1 hold option, it's set to Voice Command, which is fine.

Advanced config has some soft key remap options, but ptt isn't in there.

I don't have any option for PTT/button 5 or any other. Has anyone tried the slueth pttfix cab that worked on the 8525 in great fashion?

Originally Posted by cparkhorn

I think I've got an official release, and when I go to settings-buttons all I get is button 1 hold option, it's set to Voice Command, which is fine.

Advanced config has some soft key remap options, but ptt isn't in there.

I don't have any option for PTT/button 5 or any other. Has anyone tried the slueth pttfix cab that worked on the 8525 in great fashion?

Well I had the same thing with my pre-release, button 1 = holding send. When I put the 40C2 key in there it linked the PTT button to "button 1", so both had the same function. Not perfect, but a hell of a lot better than seeing an annoying "Initialize PTT service?" message when I hit the button accidentally while playing teeter.

when i had the offical at&t rom, i couldnt find a way of remapping. but now that i've flashed romeos rom, it's automatically remapped to comm manager. so i can turn on my bluetooth, wifi, etc with 2 clicks, real convinent