[Q]3G on the HTC Raphael/Touch Pro

---

Is the HTC Touch Pro able to work on U.S 3G band , if not is there a radio patch that will activate the U.S band on the device. Please help.

This is a very hot topic on this forum but so far from what i've been able to see none of the radios have enabled 3G. This is not to say that 3G isn't supported by the hardware although its looking pretty grim. It appears that the ELITE team is working on this since they just released Hardspl

Originally Posted by Bxsteez

This is a very hot topic on this forum but so far from what i've been able to see none of the radios have enabled 3G. This is not to say that 3G isn't supported by the hardware although its looking pretty grim. It appears that the ELITE team is working on this since they just released Hardspl

We shall see what happens, although the bands are available in the "band" settings tab so it MAY be a radio issue.

Bit early to know yet, as there is only one user here so far who has hold of an AT&T Fuze (RAPH11000) we dont have a huge ammount of detail yet.

Both the newer 1.02.25.31 and 1.02.25.19 radios seem to have similar protocols (same QCT_BOOT and HTC_BOOT), it would be good if any user could flash the (apparently) older 1.02.25.11 radio and see if it does anything?

I really wish i could help out on this 3G front but no 3G in my area...

I can help...

---

Originally Posted by mrvanx

...Both the newer 1.02.25.31 and 1.02.25.19 radios seem to have similar protocols (same QCT_BOOT and HTC_BOOT), it would be good if any user could flash the (apparently) older 1.02.25.11 radio and see if it does anything?

I have the 1.02.25.19 radio here in Chicago. I know I have good 3G coverage from my TyTN II that I had previously. But why would you think the OLDER radio (1.02.25.11) would have U.S. 3G? ...jus curious.

T
E
C

I've installed the radio 1.02.25.11 and no luck with 3G in US ATT. only edge support.

Radios

---

I tried all the radios listed on the wiki too. None of them worked with 3G.

Originally Posted by technillion

I have the 1.02.25.19 radio here in Chicago. I know I have good 3G coverage from my TyTN II that I had previously. But why would you think the OLDER radio (1.02.25.11) would have U.S. 3G? ...jus curious.

T
E
C

Its bundled with the AT&T ROM which is currently on the AT&T Fuze devices people are testing.

Higher radio version number doesnt necessarily mean a better one, as veterans of the Hermes will verify

The overseas Touch Pro cannot get 3G in the US. Just like the Diamond, the Touch Pro from overseas (RAPH100) does not have a WCDMA 850 radio.

Flash all the radios you guys want... it's not going to get you 3G on the 850 band. You'll have to wait for the US version/ATT Fuze if you're in the US and want 3G data.

Anyone know when AT&T sould release US version/ATT Fuze?