Please Help!!!

---

I wanted to send back my Touch Pro to htc.

I flashed original German ROM from here: http://forum.xda-developers.com/showthread.php?t=427507 (HTC GER 1.90.407.4)

Than I flashed original HTC radio rom

and than original SPL from here: http://forum.xda-developers.com/showthread.php?t=410150

And now I have a BIG problem: My TP hangig on TOUCH Pro screen, in the right coner is:
R 1.02.25.19
G 52.33.25.17U
D 1.90.00.00

I can't flash nothing!!! HardSpl don't work NOTHING

PLEASE HELP ME!

Pls try this
-Remove ur battery, then put it back after ~3 secs > turn on ur device.
-If ur device can boot normally, then it is Ok. > proceed as usual.
-If it doesnt, press vol down + reset to enter bootloader.
-Flash stock ROM.
-After finish, sync ur device, run SSPL on ur device
-Flash stock SPL.

I can't flash nothing! I tried allready everything

nothing helps

I allready flashed original rom and stock SPL. And now I can not flash hardspl back, so I can't flash any ROMs

If u hv successfully restored original SPL, then flashing original stock ROM should be OK. Dont use the reconstructed one.

go to bootloader, see if you have the hardspl or the stock spl
if you have the stock spl, just send it back htc as "malfunctioned unit"

Originally Posted by theclueless

go to bootloader, see if you have the hardspl or the stock spl
if you have the stock spl, just send it back htc as "malfunctioned unit"

under bootloader is SPL 1.90.0000 I guess its stock SPL? so I can now send it back?

another question, why I can't flash HardSPL 1.90.Olinex back?

Originally Posted by hang.tuah

If u hv successfully restored original SPL, then flashing original stock ROM should be OK. Dont use the reconstructed one.

do you have original Htc german rom?

P.S. Big thank to all here who helps!!!

Originally Posted by yaqxsw

under bootloader is SPL 1.90.0000 I guess its stock SPL? so I can now send it back?

another question, why I can't flash HardSPL 1.90.Olinex back?

yep, thats the original SPL
HardSPL needs to run jump.exe from the OS, just running it from bootloader wont work

Originally Posted by theclueless

yep, thats the original SPL
HardSPL needs to run jump.exe from the OS, just running it from bootloader wont work

so their is no way more to flash HardSPL?

Than I will send it back tomorrow.

I hope I get another one

you can flash the original ROM, see if it boots up