NO USB

Dreamzonne · 16th January 2009, 02:59 PM

NO USB

Hi,
A friend gives me a Qtek S200 G4 WM5 with IPL 2.09.0001 and SPL 2.09.0001

But the USB doesn't work, it's detected as unknown device (checked in 4 windows XP)
With an USB tool i can see that it's HarwareID = USB\UNKNOWN, the same with CompatibleIDs = USB\UNKNOWN

by this the XP doen'st found any drivers avilable (yes I have ActiveSync installed)

I stay in the same situation in 3 colour bootloader mode, when I put the USB cable in the Qtek it marks USB at left bottom but the Windows XP only detect the usb connection as an unknown device.

What can I do?
There is another form to upgrade to WM6 and upgrade the SPL,
some direct SERIAL access to testpoints/pins ??

Anything can give me a clue!!

Thanks.

Charevian · 16th January 2009, 03:54 PM

Just as first,

uninstall the unknows device of your hardware config, connect the phone again, and install the drivers manually, so dont use auto install...

when u have done this, just remove the cable out of the phone, and put it in again after 30 seconds.

if it's ok, it will be ok.

from then on you can flash your phone!

...

if its not working your bootloader is ****ed up, or try another USB port on the pc otherway your cable or port(on phone or PC)) will be not good...

...

other way to do it, just install windows xp pro insteed of home...
install active sync, and put the usb cable in the pc and in the phone, it will help alot...

...

It can be that u have to try another cable if u buy an mp3 player or digital camera, almost all cables are the same as the usb cable of the prophet you can try this cables also to get it working!!

Windows XP Home edition doesnt find this drivers everytime.
Windows XP Pro will have no problems at all...