Pharos 619 SDHC working plus GPS setup
For SDHC to work:
1. Install SDHC_v071227.cab
2. Install to device and press cancel when it's finished. Don't let it reboot.
3. Install Certs.cab. Won't prompt you for where. When finished press reset button on bottom of device.
Tested on Kingston 8gb SDHC card and Pharos 619 running wm6.1. Firmware 1.1.5 Build 9.
Press Start -> Settings -> External GPS ->
GPS Program port = COM9
GPS hardware port = COM5
Baud rate = 9600
Manage GPS automatically = checked
Also included a cab so you can use any dialtone.
For better battery life make sure Recieve all incoming beams is not checked under Settings -> Beam
Bluetooth also seems to suck battery life fast on this phone.
If you tried any other SDHC hacks you may have to back up your data and do a factory reset. Start -> Settings -> Factory reset.