CECT/Daxian T32/X999 - ROM dev. and flashing?!

---

First post - Hi all!

I've been searching and reading many post here regarding the chinese iClone, I have the CECT T32 and so far I'm pretty happy with it. I bought it with the intention of doing some customisation but have since learnt that no one has successfully flashed this device (Can't enter Bootloader). I've managed to dump solme stuff from it (Thanks Chuckbert) and I now have 4 files - PART00 /01 /02 /03 .. all .RAW ... have I got the correct files to start with?... I've also been looking for a 'ROM kitchen' but they all seem to be device specific... I've heard the T32 hardware is similar to the Wizard... not sure....

So many many question -

Can I start 'cooking' withe the files I've dumped?...
Can I extract the OS files/drivers and other stuff from these .RAW files?.. and with what tools?
Is there a way to flash my device? (MSFLASH) - M-Systems Flash Disk?
Can I do a full flash and load a new bootloader?...

I've made some progress by dumping those files but now I'm hitting brick walls!

Cheers

I used the following to dump -----------
C:\itsutils>pdocread -w -d msflash -p Part00 -b 0x800 0 0x11f000 Part00.raw
CopyTFFSToFile(0x0, 0x11f000, Part00.raw)

-l details ------------
C:\itsutils>pdocread -l
125.75M (0x7dc0000) MSFLASH
| 1.12M (0x11f000) Part00
| 1.75M (0x1c0000) Part01
| 47.13M (0x2f20000) Part02
| 75.75M (0x4bc0000) Part03
970.00M (0x3ca00000) DSK1:
| 969.88M (0x3c9e0e00) Part00
STRG handles:
handle#0 47a7de5e 969.88M (0x3c9e0e00)
handle#1 67a403da 75.75M (0x4bc0000)
handle#2 27a67aee 47.13M (0x2f20000)
handle#3 a7a67aca 1.75M (0x1c0000)
handle#4 a7a678fa 1.12M (0x11f000)

CECT/Daxian T32/X999 - ROM dev. and flashing

---

Just wondering how far you've got since you made this post? I'm attempting the same with my T32 and are finding the going slow. I haven't yet been able to create the 4 files yet successfully. I'm have trouble with the following command with the -b switch and obtaining the part correct size.

pdocread -w -d msflash -p Part00 -b 0x800 0 0x11f000 Part00.raw

I'm using the following command to extract the part sizing however it incorrectly tell me that all parts are 0x200 in size.

pdocread -w -d msflash -p Part00 -t

I've copied your command above to successfully dump part00.raw from my PDA but I cannot proceed any further with the other parts without the correct sizing. Could you tell me how you got the correct sizing?

Boot loader for Daxina T32

---

Found this Rom for Daxian T32, people on that forum said it works!
just copy content to flash disk and press
volume down + camera + power
best flash disk for this is 256 or 512 mb.

link

---

http://rapidshare.com/files/29017074...9_T32.zip.html

thank you Determo 13;
Do you mean a usb falsh disk with adatator for the daxian T32 ?
My daxian t32 stay on the windows logo since 1 year ;
Still waiting for a Rom to flash !
unfortunately your links http://rapidshare.com/files/29017074...9_T32.zip.html does not work ;
May you réupload ?
Thanks

bootloader

---

sand disk for your phone, just copy all content there and press
volume down + camera + power done.... new link to bootloader you can find
http://forum.xda-developers.com/show...390574&page=15

thanks Dertermo 13 , perfectly working now !! after one year block on windows logo;
phsh

Daxian T32 rom development

---

I can not download the link. Can you redownload it? or is there any other link to wonload it? Thank you