Originally Posted by opensea

Come on guys. Release something. I want to see Android on my Topaz finally.

Eh ? Can't you just try this .exe instead of making pointless postings ?

Originally Posted by cr2

Eh ? Can't you just try this .exe instead of making pointless postings ?

Use android just executing an exe? Is it that easy? Isn't there a package? Isn't there a guide?

You see i'm newbee with linux thing.

Originally Posted by opensea

You see i'm newbee with linux thing.

Copy the executable to your topaz, and run it.
The program is a linux kernel + some initial debug filesystem
and has nothing to do with android.
I am interested in the data you may see on the LCD.
I promise you that this program is not a virus

I have tried it.
It loaded haret, vibrated two times and displayed several messages.
This was the best way that I've found out to show. Hope it helps.

Here is what I got Followed by two vibrations from the phone.(It's small so it took a while to typ out)

HTC Linux framebuffer console by druidu
S[ 0.000000] Linux version 2.6.27-00544-g7692818-dirty
(cr20debian) (gcc version4.1.2) #75 PREEMPT Sun Ict 11 22:30
:30 CEST 2009
[ 0.000000] CPU: Armv6-compatible processor [4117b362] re
vision 2 (ARMv6TEJ) cr=00c5387f
[ 0.000000] Machine HTC Topaz cellphone (Topaz is a sili
cate mineral of aliminium and Flourine)
[ 0.000000] fixup: nr_banks =1
[ 0.000000] fixup: bank0 start=10000000, node=00000000, s
ize=05900000
[ 0.000000] ignoring unrecognised tag 0x00000000
[ 0.000000] nand tag: n=0 name=<NULL> offset=0x0 size=0x0
Flags=0x0
[ 0.000000] nand tag: n=1 name=<NULL> offset=0x0 size=0x0
Flags=0x0
[ 0.000000] nand tag: n=2 name=<NULL> offset=0x0 size=0x0
Flags=0x0
[ 0.000000] nand tag: n=3 name=<NULL> offset=0x0 size=0x0
Flags=0x0
[ 0.000000] nand tag: n=4 name=<NULL> offset=0x0 size=0x0
Flags=0x0
[ 0.000000] nand tag: n=5 name=<NULL> offset=0x0 size=0x0
Flags=0x0
[ 0.000000] nand tag: n=6 name=<NULL> offset=0x0 size=0x0
Flags=0x0
[ 0.000000] Memory policy: ECC disabled, DATA cache write
back
[ 0.000000] CPU0: D VIPT write-back cache
[ 0.000000] CPU0: I cache: 32768 bytes, associativity4,
32 byte lines 256 sets
[ 0.000000] CPU0: D cache: 32768 bytes, associativity4,
32 byte lines 256 sets
[ 0.000000] Built 1 zonelists in Zone order, mobility gro
oping on. Total pages: 19304
[ 0.000000] Kernel command line: msmts_calib=0x6D.0x5D.0x
340.0x375 mem=76M msmvkeyb toggle=hide lpj=2637824 board_htc
raphael.disable wifi=1 init=/init console=tty0 delay=2
[ 0.000000] PID hash table entries: 512 (ordered: 9, 2048b
ytes
[ 0.179351] console [hts_fb-1] enabled
[ 2.044525] console: clour dummy device 80x30
[ 2.133341] console handover: boot [htc_fb-1] real [tt
y0]

(FOLLOWED BY TWO VIBRATIONS)

Why didn't I think of taking a picture? Took me like 15min to type it out VS. 15sec to shoot and post.

I have got the same output...please help...i really want my TD2 can use Android....Thanks!

Originally Posted by opensea

Come on guys. Release something. I want to see Android on my Topaz finally.

Well then. Thanks.

Originally Posted by melvin18

I have got the same output...please help...i really want my TD2 can use Android....Thanks!

Same here.

Ok, the boot process reaches the same stage on rhodium, so
we need somebody to connect haret on port 9999 after the crash
and dump the bootlog from RAM console area.
Instructions are coming.

I'm getting excited.