Jade Stock LZX compression WM61 OS 5.2.20771 OEM 2.33.721.1 & Tweaked Version

---

Jade_Stock_WM61_CE_OS_5.20771_OEM_2.33.721.1_UC_Ca pable
(Stock ROM | NetCF 3.7 | UC Capable? | SYS SEC OFF | LZX Compression | ULDR reduction in Payload | Program Memory 128.67 | Fast & Stable)

Jade Stock LZX compression WM61 OS 5.2.20771 OEM 2.33.721.1
(LZX Compression | ULDR reduction in Payload | Program Memory 128.67 | Fast & Stable | No Tweaks No addon Exactly same as Stock)

You Need HardSPLV41 for this i.e., your Tricolor bootloader screen shows 2.32.olinex
( Switch off jade; press volume down key and power key to go to bootloader )

******** HARD RESET AFTER 1st BOOT ********



Thanks to UDK, Olinex, Ervius, Da_G, ibrythill & other xda dev. Special Thanks to People Who use and test my ROM

Hi Ironeagle. Thanks for a new 6.1 ROM, I am going to try it right away.

I found a problem which affects quite a few of your 6.1 ROMs. Not sure why, but S2U2 (any version), when waking the phone up, sometimes (like 1:10 ratio) the screen stays black for about 5 seconds and then finally S2U2 appears.

Yesterday I tried
Sumo Voyager WM6.1 CE OS 5.2.21128 Build 21127.1.6.1 (OEM 2.32.707.2) SPL 2.32.44800
Jade LeanCut Blazer WM6.1 OS 5.2.21046 (Rhodium Port)
FeatherLite_CE_OS_5.2.21128_Build_21127.1.6.1__OEM _2.32.723.2__SPL_2.32.44800_No_Manila.

And all the same. Newer had this problem with 1.40.721.2.LITE.v1.5_sliders7 ROM.

Anyone have seen similar problem with S2U2?

Originally Posted by fenikso

Hi Ironeagle. Thanks for a new 6.1 ROM, I am going to try it right away.

I found a problem which affects quite a few of your 6.1 ROMs. Not sure why, but S2U2 (any version), when waking the phone up, sometimes (like 1:10 ratio) the screen stays black for about 5 seconds and then finally S2U2 appears.

Yesterday I tried
Sumo Voyager WM6.1 CE OS 5.2.21128 Build 21127.1.6.1 (OEM 2.32.707.2) SPL 2.32.44800
Jade LeanCut Blazer WM6.1 OS 5.2.21046 (Rhodium Port)
FeatherLite_CE_OS_5.2.21128_Build_21127.1.6.1__OEM _2.32.723.2__SPL_2.32.44800_No_Manila.

And all the same. Newer had this problem with 1.40.721.2.LITE.v1.5_sliders7 ROM.

Anyone have seen similar problem with S2U2?

I believe there is a setting in S2U2.. wakeup delay something?..

So again the same .

I tried a lots of settings. I know about this one, but it does something else I believe. But I tried . The weird thing is that it happens only sometimes...

I will try some more ROMs and also ask in S2U2 thread. It is really annoying.

Can you please recommend me some of your 6.1 ROMs worth trying? Even very old ones.

Thanks.

Originally Posted by fenikso

So again the same .

I tried a lots of settings. I know about this one, but it does something else I believe. But I tried . The weird thing is that it happens only sometimes...

I will try some more ROMs and also ask in S2U2 thread. It is really annoying.

Can you please recommend me some of your 6.1 ROMs worth trying? Even very old ones.

Thanks.

I like all my ROMs...

LZX Compression | ULDR reduction in Payload,what is this 2?

Originally Posted by tcchuin

LZX Compression | ULDR reduction in Payload,what is this 2?

LZX http://forum.xda-developers.com/showthread.php?t=507574

ULDR http://forum.xda-developers.com/show...49&postcount=7

does lzx really worth?

Originally Posted by tcchuin

does lzx really worth?

We get additional memory..

Can you advise me which is better to install please Ironeagle

I am leaning towards - Jade Stock LZX compression WM61 OS 5.2.20771 OEM 2.33.721.1

Big Thanks