Quote:
Originally Posted by yianp
I bought one from ebay. Unfortunately no instructions with the package 
|
i've tried to open the device.
It's not so hard:
AT OWN RISC!!!
Unscrew the 4 screws, click it slightly open.
now you can see on 1 side a small flatcable for the digitizer, unlock it by swapping the behind of the connector. Unplug it.
Flip the PCB and unplug the 2 connectors for the screen and buttons.
Now you can unscrew 2 litle screws at the buttons.
remove the buttons carefully.
Now you can slightly press on the back of the old digitizer untill it loosses.
Place the new one, carefully press on the glue-parts untill you think it is tight enough.
Now read this post backwards to put it all together again.
If you're ready, push the on button.
When it asks for the pincode press : volume up + centerbutton to calibrate.
Et voila.
AT OWN RISC!!!
i'm not responsible for any damage.
|