Originally Posted by MysticGenius

Nah, if you read and do every step fully it works fine! you only get problems as some users have skipped a step THEY think is unnecessary and it fails!

Anyway, post 2 & 3 are very complete! if you have a problem you will probably find an answer in the thread if not post the problem and it can be fixed!!

MG

So I do not need to install any drivers as I am running XP?1

And what is ment by copy it onto "Internal Storage"? Where do I put the ROM file?

Originally Posted by Boyo92

So I do not need to install any drivers as I am running XP?1

No Drivers for XP folow kgerry's instructions

Originally Posted by Boyo92

And what is ment by copy it onto "Internal Storage"? Where do I put the ROM file?

You answered your own question! Internal Storage!! what phone are you using? Diamond?

MG

Originally Posted by MysticGenius

Not related to MTTY, although i can try and help you, but via pm since this thread is for MTTY!

Check your messages

MG

Thanks a lot...
Your help is really appreciated..

Originally Posted by MysticGenius

Not related to MTTY, although i can try and help you, but via pm since this thread is for MTTY!

Check your messages

MG

I have the same problem as davipiero, wifi not turning on with any of the ROMs, can you lend me a hand too, im using a diamond. much appreciated for all the work you have done so far

Is my diamond dead...or?

---

Hi everybody. I wanted to flash this ROM - Kisja_SUN_Y_1_1_WM_6_1_TF3D_2_5_WWE. After some wrong passes , I had in my hands a phone in boot mode(stripescreened) and also with hardSPL 1.4 from OliNex..But with this hSPL, my flashing always stopped on 0%. Then I chaged some hSPL's, but after I put this one (RUU_Signed_SPL193stock.zip from post http://forum.xda-developers.com/show...7&postcount=20) I can't neither change hSPL nor flash the ROM(both stops at 0%, and I tried very much of rom's and SPL's).
Olny when I try to flash the official one, it stops at 1%, terminates and tells that ERROR [294] - INVALID VENDOR ID (and then restarts and white screen appears).I tried a lot of originals, but the same result. Neither ActiveSync nor Explorer doesn't observe my phone(only MTTS or ROMUpdateUtility.exe)

DIAM100 64M
SPL-1.93.0000
MicroP-Diam (LED) v11

MTTY 1.42 :

Cmd>task 2a
Format ALL start
backup SPL OK
backup MISC configuration OK
SPL start start block=288, total block of CE=1760
Write 0xFF start page=0x4800, total page=0x1B800
restore SPL OK
restore MISC configuratoin OK
restore MFG configuratoin OK
Format ALL end

Cmd>info 8

--- 2K bytes sector version ---

DEVICE NAME=samsung_k9k2g08
DEVICE ID=0xAA
DEVICE MAKER ID=0xEC
PAGE SIZE=0x800
TOTAL PAGE SIZE=0x840
BLOCK COUNT=0x800
BLOCK PAGE=0x40

Checking block information

OS NOT FOUND !!!


Cmd>task 28
Format start
Fill RSVD information for block 288 to 321
TAG NOT FOUND !!! NOT CLEAR STORAGE !!!
Format end


Cmd>info 2
HTCSH3G__402’1plHTCE

P.S. - Sorry for my bad English.

Originally Posted by Kutthoat5150

I have the same problem as davipiero, wifi not turning on with any of the ROMs, can you lend me a hand too, im using a diamond. much appreciated for all the work you have done so far

Yes PM me! Im revising at the moment but ill sort you out asap!!

MG

Originally Posted by Kolobok16

P.S. - Sorry for my bad English.

Ok, try this:

1: Get a stock rom
2: Put phone into Bootloader and connect to MTTY
3: use these tasks in this order:

set 14 0
task 29
task 8

4: after "task 8" the phone will reboot, IMMIDIATELY bring the phone back into bootloader
5: connect to usb
6: flash the stock rom via USB

Let me know what happens

MG

Originally Posted by MysticGenius

Ok, try this:


Let me know what happens

MG

Cmd>set 14 0
HTCST ÚÈÒHTCE
Cmd>task 29
Format BINFS start
Fill RSVD information for block 288 to 321
CE start sector=0x14, total sector of CE and TFAT=0x14
CE start start block=321, total block=1727
Write 0xFF start page=0x5040, total page=0x1AFC0
Format BINFS end

Cmd>task 8

When flashes, restarts at 1% , and the ERROR [294] - invalid vendor ID!!!!

Great thread. Nice work.

Originally Posted by Boyo92

Great thread. Nice work.

Glad you found it useful!

MG